Repar Tix SFR
Repar Tix SFR consists of special cements, silica fume, anti-shrinkage agents, specific additives and selected aggregates, high-performance in terms of adhesion, adherence, mechanical resistance, intrinsic watertightness, dimensional stability and overall hardness. Repar Tix SFR is added with a mix of amorphous metal fibres of 30 mm (โฅ0.9% by weight) and multifilament synthetic fibres of 6 mm (โฅ0.08% by weight).
Fields of application
Restorations, repairs and consolidations, even of considerable thicknesses and dimensions, on reinforced concrete and masonry structures. Reinstatement and reconstruction of the concrete cover on heavily deteriorated reinforced concrete works, even in particularly demanding and heavily stressed environments (marine, industrial, purification plants, hydraulic pipes). Reliable and durable structural consolidation of road structures (bridges, viaducts, tunnels, etc.). Reinforcement hoods on vaulted wall structures. Reinforcements and seismic adjustments in combination with structural glass fiber meshes from the ARMAGLASS line, Armaglass Connector glass fiber connectors, helical bars in Helix Steel AISI 304 stainless steel.
Allowed supports
Plasters
Concrete
Cement-based or lime-based mortars
Prefabricated concrete
Mixed walls (bricks and stones)
Preparation of supports
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes).
Mode of use
Pour about 2/3 of the mixing water into the mixer, add Repar Tix SFR and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 20-22% of the weight of the bag. After mixing is completed wait a few minutes before applying.
Place on site by rendering or using plastering /or shotcrete machines, use product quantities appropriate for the specific requirements of the construction site .
Application methods
Finishing trowel
Shotcrete machine
Plastering machine
Spatula
Brick trowel
Technical specifications
Compressive strength after 1 day
UNI EN 12190
โฅ 25 N/mmยฒ
Compressive strength after 7 days
UNI EN 12190
โฅ 50 N/mmยฒ
Compressive strength after 28 days
UNI EN 12190
โฅ 70 N/mmยฒ
Flexural strength after 28 days
UNI EN 196/1
โฅ 9.5 N/mmยฒ
Breaking load longitudinal
3.8 N/mmยฒ
Resistance to carbonatation
UNI EN 13295
0.5 mm
Skid resistance
UNI EN 13036-4
56.0 mm
Resistance to the limit of proportionality (average value) EN 14651
4.7 MPa
fR1 medium_ average residual strength after cracking (0.5 mm) EN 14651
3.1 MPa
fR3 medium_ average residual strength after cracking (2.5 mm) EN 14651
1.6 MPa
Reaction to fire
EN 13501-1
A1
Static elastic modulus
EN 13142
24000 N/mmยฒ
Adhesion to substrate
UNI EN 1015-12
2 MPa
Capillary absorption
UNI EN 13057
0.48 kgโขh^0.5/mยฒ
Determination of thermal compatibility
UNI EN 13687-1
2.4 mPa
Coefficient of permeability
ASTM D 5887
10โปยนยฒ m/s
Chloride content
UNI EN 1015-17
<0.01 %
Consumption
Approximately 19 kg/mยฒ of Repar Tix SFR for every centimetre of thickness to be implemented (approximately 1900 kg per cubic metre).
Packaging and dimensions
Bag 25 kg
Pallet: 50 x (Bag 25 kg)
Storage and conservation
Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
Warnings
Adopt the necessary care and moist hardening procedures of exposed surfaces that must be protected from rain, from direct sunlight, ventilation, etc.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.