Syntech Poliurea Primer – Epoxy Metal zoom
Syntech Poliurea Primer – Epoxy Metal image 1
Syntech Poliurea Primer – Epoxy Metal image 2
Syntech Poliurea Primer – Epoxy Metal image 3

Syntech Poliurea Primer – Epoxy Metal

Two-component epoxy primer specific for metal surfaces

Syntech Poliurea Primer – Epoxy Metal is a two-component primer based on epoxy resins free from solvents, used to promote adhesion, as a surface sealant for concrete, applied as a substrate for works with polyureas on metal surfaces and epoxy and polyurethane coatings.
Components
Two-components
Appearance
Liquid
Customs code
3907 3000

Request product info

    By submitting I agree to the privacy notice

    Lines of belonging
    Linea prodotto Aqua
    Linea prodotto Infratech
    Thematic site
    Syntech Poliurea
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products
    Fields of application
    Adhesion promoter, surface sealant for concrete, to be applied as a substrate for works with polyureas on metal surfaces and epoxy and polyurethane coatings.
    Allowed supports
    Metal surfaces
    Steel
    Preparation of supports
    The application must take place on a dry and degreased surface; the substrate must not have crumbly or detached parts and with a degree of humidity that must not exceed 5%.
    Preparation of the substrate may require some types of mechanical action: Smoothing,
    bush-hammering, shot peening, hydro-washing. Other mechanical actions that can make the support suitable.

    Mode of use
    The individual components must be mixed carefully until a homogeneous mass is obtained. The material can be applied by roller, brush or spray by means of special airless machines, even in two coats. The temperature of the support must always be at least 3°C higher than the dew point temperature. Minimum application temperature +5°C, maximum temperature +35°C.
    Application methods
    Low pressure airless nebulizer
    Brush
    Paint roller
    Tool cleaning
    Thinner for resins
    Key features
    Density
    Density: 1.1 (A) / 1.0 (B) ± 0.1 g/cm³
    Dosage
    Dosage: 150 - 200 g/m²
    Mixing ratio
    Mixing ratio: 2:1 (in peso) _
    Shelf-life
    Shelf-life: 12 months
    Solvent-free
    Solvent-free
    Use wearing protective glasses
    Use wearing protective glasses
    Use wearing protective gloves
    Use wearing protective gloves
    Technical specifications

    Touch hardening at 20°C
    a 23° C

    >4 h

    Gel time
    a 23° C

    270 min

    Time before second coat at 20°C
    a 23° C

    max 10 h

    Complete hardening at 20°C
    a 23° C

    7 day
    Consumption
    Approximately 0,20 kg of Syntech Poliurea Primer – Epoxy Metal for every square metre of surface to be treated.
    Available colors
    Transparent / Neutral
    Packaging and dimensions
    Can 10 kg [A]
    Can 5 kg [B]
    Kit: 1 Can 10 kg [A] + 1 Can 5 kg [B]
    Storage and conservation
    Protect from freezing.
    Additional content

    Warnings
    Avoid contact with skin and mucous membranes. Use appropriate protection, in particular, goggles and gloves. Do not inhale any vapours deriving from the processing of the product and if possible, ventilate the work areas.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Video

    Request product info

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross