Sanafirm zoom
Sanafirm image 1
Sanafirm image 2
Sanafirm image 3


Quick compound, based on lime and aluminates, for fixings and anchorages

Adhesive, thixotropic, reinforced fibre compound, based on hydraulic lime, reinforced fibre, fast-curing, for fastening and anchorage, of wall bodies, structures, inserts, plates, frames, bars, sanitary, etc., in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments.
Customs code
3824 5090

Request product info

    By submitting I agree to the privacy notice

    Lines of belonging
    Linea prodotto Building
    Linea prodotto Sanageb
    Thematic site
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Related products


    Sanafirm consists of hydraulic lime, botticino, quartz sands, kaolin, aluminates and natural fibres. It does not contain cement, resins, solvents and radioemissive elements.
    Fields of application
    Fixing and anchoring, in wall bodies, plates, door and window frames, washbasins and sanitary ware in general, bars, clamps, connectors, and metal inserts etc.
    Allowed supports
    Cement-based or lime-based mortars
    Mixed walls (bricks and stones)
    Stone walls
    Floor screed
    Preparation of supports
    Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
    Mode of use
    Pour about 2/3 of the mixing water into the mixer; gradually add Sanafirm and the water still required, continue to mix until a homogeneous lump-free mixture of the desired consistency is obtained. Apply with brick trowel or filling knife. The mixing water indicatively necessary is equal to 15-16% by weight (3.5 -4 litres per bag 25kg).
    Application methods
    Brick trowel
    Tool cleaning
    Key features
    Density: 1.800 kg/dm³
    Maximum diameter of aggregate
    Maximum diameter of aggregate: 2 mm
    Mix with water
    Mix with water: 15-16 %
    Pot-life: 15 min
    Quick setting product
    Quick setting product
    Shelf-life: 6 months
    Temperature of use
    Temperature of use: +6 / +30 °C
    Use wearing protective gloves
    Use wearing protective gloves
    Technical specifications

    Touch hardening at 20°C

    8 h

    Complete hardening at 20°C

    36 h
    Approximately 1.6 kg of Sanafirm for each cubic decimetre of volume to be filled.
    Available colors
    Packaging and dimensions
    Bag 25 kg
    Pallet: 50 x (Bag 25 kg)
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    It is recommended to mix only the material immediately needed, given the short pot life of the product.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit:
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation
    Key features

    Request product info

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease