Sanazieg zoom
Sanazieg image 1
Sanazieg image 2
Sanazieg image 3

Sanazieg

Specific adhesive mortar for jointing and filling of exposed face masonry

Adhesive high breathability and moldability mortar, based on hydraulic lime, for filling the vanishing points between elements in stone, brick, mouldings, decorative articles etc., in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments. It can be added with earth colours, ornamental aggregates etc.
Components
Single-component
Appearance
Powder
Customs code
3824 5090

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    EN 998-1
    Lines of belonging
    Linea prodotto Building
    Linea prodotto Opus
    Linea prodotto Sanageb
    Thematic site
    Sanageb
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media

    Sanazieg

    Sanazieg is a product consisting of hydraulic lime, botticino, kaolin, calcium caseinate, Vichy salt, tartaric acid, ammonium salts and natural fibres. It has high hygroscopicity and breathability, contains no cements, resins, solvents and radioemissive substances.
    Fields of application
    Jointing and filling interstices between bricks, or between bricks and stones, in mouldings, and in decorative articles, etc., in interventions of restoration and rehabilitation of old buildings and buildings of historical interest.
    Allowed supports
    Bricks
    Mixed walls (bricks and stones)
    Stone walls
    Preparation of supports
    Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
    Mode of use
    Pour about 2/3 of the mixing water into the mixer. Gradually add Sanazieg and the water still required, continue to mix until a homogeneous, lump-free mixture of the desired consistency is obtained. The mixing water indicatively necessary is equal to 14%-16% by weight (3.5 - 4 litres per 25 kg bag).

    Apply with trowel, mechanical plastering machine, etc., in the interstices prepared as specified.

    To highlight the aggregate, use a sponge or a wet brush as soon as the plaster Sanazieg begins to harden. For more significant removals, spray retardant solutions like PRERIT, immediately after spreading.

    Application methods
    Brick trowel
    Dispensing gun
    Pump
    Spatula
    Tool cleaning
    Water
    Key features
    Maximum diameter of aggregate
    Maximum diameter of aggregate: 0.8 mm
    Mix with water
    Mix with water: 14-16 %
    Pot-life
    Pot-life: 60 min
    Shelf-life
    Shelf-life: 12 months
    Technical specifications

    Compressive strength after 28 days
    UNI EN 1015-11

    > 23 N/mmยฒ

    Flexural strength after 28 days
    UNI EN 1015-11

    > 4.5 N/mmยฒ

    Density
    UNI EN 1015-6

    1700 kg/mยณ

    Capillary absorption
    UNI EN 13057

    0.40 kgโ€ขh^0.5/mยฒ

    Complete hardening at 20ยฐC
    a 20ยฐC

    30 day

    Chloride content
    UNI EN 1015-17

    < 0.01 %

    Coefficient of permeability
    UNI EN 1015-19

    18 ฮผ

    Bonding force
    UNI EN 1015-12

    1.5 N/mmยฒ

    Static elastic modulus

    16.000 N/mmยฒ
    Consumption
    Approximately 1.6 kg of Sanazieg for each cubic decimetre of volume to be filled (on average 10-15 kg/mยฒ of solid brick masonry to fill).
    Available colors
    Beige
    Packaging and dimensions
    Bag 25 kg
    Pallet: 50 x (Bag 25 kg)
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    Warnings
    Protect fresh surfaces from direct exposure to sunlight, from the rain and wind, cure the prolonged moist hardening.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation

    Request product info

      By submitting I agree to the privacy notice

      Copyright ยฉ 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross