Sanafarbe I zoom
Sanafarbe I image 1
Sanafarbe I image 2
Sanafarbe I image 3

Sanafarbe I

Decorative, restoring, breathable putty coat, based on lime putty

Natural, protective, decorative, breathable, pigmented, non-toxic putty coat, naturally mildewcide, based on hardened lime putty and botticino marble dust, for indoors and outdoors. Formulation prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments.
Components
Single-component
Appearance
Paste
Customs code
3214 9000

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    EN 15824
    Lines of belonging
    Linea prodotto Building
    Linea prodotto Opus
    Linea prodotto Sanageb
    Thematic site
    Opus DrySanagebSanawall
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products

    Sanafarbe I

    Product based on lime putty and natural pigments.

    SANAFARBE putty coat has a high breathability, a remarkable mildewcide and antibacterial capacity. It has no solvents, thinners, harmful substances in general.

    Fields of application
    Embodiment of putty coat finishing, protective and decorative, internal and external masonry building, in ecological building interventions and in the restoration of vintage buildings and monuments.
    Allowed supports
    Lime and lime-cement plasters and mortars
    Preparation of supports
    The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed.
    Mode of use
    Spread Sanafarbe I, into two coats: the first, by simple deposition, with steel trowel, the second for laying and finishing, with sponge float. The application of the second coat must be carried out, when the first coat starts to dry, in one of two conditions suggested: with dry trowel, for smooth surfaces, with moistened trowel, for antique-effect surfaces. SANAFARBE-I is dry to the touch after 4 hours, it can be overcoated after 2-5 hours, while it will be dry in-depth after 16-32 hours.
    Application methods
    Finishing trowel
    Sponge float
    Spatula
    Tool cleaning
    Water
    Key features
    Density
    Density: 1.77 kg/dm³
    Shelf-life
    Shelf-life: 12 months
    Temperature of use
    Temperature of use: +8 / +30 °C
    Technical specifications

    pH

    13

    Coefficient of permeability
    UNI EN ISO 7783-2

    17 μ

    Dry residue
    10’ a 150°C

    72 %
    Consumption
    Indicative consumption depending on the different particle sizes of Sanafarbe I available:
    1 mm GRAIN: approximately 1.6 -1.8 kg/m²;
    1.2 mm GRAIN: approximately 1.8 -2.0 kg/m²;
    2 mm GRAIN: approximately 2.4 -2.8 kg/m²;
    2.2 mm GRAIN: approximately 2.6 -3.0 kg/m².
    The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test.
    Available colors
    White
    Packaging and dimensions
    Pail 5 kg
    Pail 25 kg
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    Warnings
    The colours may vary slightly depending on the temperature conditions at the time of laying and during the drying and dessication steps.

    Avoid prolonged direct exposure of the fresh surfaces to the wind and the sunshine.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation

    Request product info

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross