Sanadek zoom
Sanadek image 1
Sanadek image 2
Sanadek image 3

Sanadek

Non-toxic breathable paint, for interiors, based on lime putty

Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments.
Components
Single-component
Appearance
Liquid
Customs code
3209 9000

Request product info

    By submitting I agree to the privacy notice

    Lines of belonging
    Linea prodotto Building
    Linea prodotto Opus
    Linea prodotto Sanageb
    Thematic site
    Opus DrySanagebSanawall
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products

    Sanadek

    Product based on lime putty and natural pigments.

    Sanadek has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general.

    Fields of application
    Decorative and interior renovation paint.
    Allowed supports
    Plasters
    Cement-based or lime-based mortars
    Drywall
    Plaster (gypsum)
    Fiber-cement
    Preparation of supports
    The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio.
    Mode of use
    Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours.
    Application methods
    Brush
    Paint roller
    Sprayer
    Tool cleaning
    Water
    Key features
    Density
    Density: 1.39 kg/dmยณ
    Shelf-life
    Shelf-life: 12 months
    Solvent-free
    Solvent-free
    Temperature of use
    Temperature of use: +8 / +30 ยฐC
    Technical specifications

    Wet abrasion resistance
    EN 13300 - categoria

    3


    max

    20 g/l

    Dry residue

    65 %
    Consumption
    Apply from 0.30 to 0.40 liters of Sanadek per square metre of surface to be painted.
    Available colors
    White
    Packaging and dimensions
    Pail 4 l
    Pail 14 l
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    Warnings
    Colours may vary slightly depending on the temperature conditions at the time of spreading and during the stages of drying.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation

    Request product info

      By submitting I agree to the privacy notice

      Copyright ยฉ 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross