The main properties of Armarock B50 are:
Bidirectional reinforcement in alkali-resistant basalt fibre, pre-primed, to be used in combination with our mortars (Unisan, Intosana, Repar line), GFRP connectors (Armaglass Connector line), stainless steel connectors (Helix Steel Aisi 304 line) , for the "reinforced" structural reinforcement of masonry and reinforced concrete products with CRM and FRCM techniques. Anti-tipping systems for partition walls and cladding. Structural reinforcement of arched and vaulted wall elements, both at the extrados and intrados. Reinforcement for reinforcing plastering to be created in historical and monumental contexts, capable of more uniformly distributing the stresses induced by seismic events, without substantial changes in the distribution of masses and stiffness.
To prepare the support, carefully follow what is indicated in the technical data sheets of the product with which the Armarock B50 mesh is combined. In general, in the case of reinforcements of masonry males or intrados/extrados of vaults and arches, it is necessary to proceed with the complete removal of the existing plaster, manually or with mechanical tools, and of all possible inconsistent or detaching parts, up to get to the heart of the masonry and obtain a healthy, compact and mechanically resistant support. Wet the support to be strengthened; the excess water present on the surface must be allowed to evaporate so that the masonry to be strengthened is saturated with water but with a dry surface.
Application with a flat metal trowel or spray of a first uniform layer of approx. 5-6 mm of mortar (Unisan, Intosana or Repar line) chosen according to the characteristics of the support.
At the same time as applying the first layer of mortar while it is still fresh, position the Armarock B50 mesh, compressing it with a flat trowel, so that it penetrates the applied mortar. Adjacent nets must be overlapped by at least 10-15 cm.
Application of a second layer of mortar on the previous one while it is still fresh, in such a way as to completely cover the mesh and reach the desired thickness.
In the case of anti-tipping systems, the recommended overall mortar thickness is approximately 10 mm.
In the case of reinforcement of arches or vaults, extradoss or intradoss, it is recommended to turn up the reinforcement system, in correspondence with the shutters, by at least 40 cm.
To improve the anchoring of the reinforcement system it is possible to appropriately prepare any connections made with elements in GRFP (Armaglass Connector) or stainless steel (Helix Steel AISI 304). The connections increase the efficiency of the applied reinforcement. Type, number and pitch of punctual connections must be defined during the design phase.
Unit weight
Warp tensile strength
Net elastic modulus (warp)
Longitudinal elongation at break
Net elastic modulus (weft)
Mesh size
Weft tensile strength
1.1 m/m²: The adjacent sheets of basalt fiber mesh must be overlapped along the edges by at least 10 cm.
