Armaglass Structura 305
ARMAGLASS 060 is perfect for preventing the formation of cracks and fissures by spreading the stresses on the whole surface, the use of fibreglass mesh is practically indispensable. The mesh used is generally low basis weight and reduced thickness. It is particularly recommended for works of restoration and rehabilitation of superficial layers of concrete internal and external walls.
Fields of application
Reinforced micro-screeds of concrete structural and/or decorative elements.
Allowed supports
Concrete
Cement-based or lime-based mortars
Mixed walls (bricks and stones)
Brickworks
Stone walls
Floor screed
Lime and lime-cement plasters and mortars
Mode of use
Lay the wire mesh on the fresh mortar from the top downwards, filling it with a spatula, taking care to overlap them at least 10 cm and to avoid the formation of air bubbles and folds.
Application methods
To be added to other components
Apply by hand
Technical specifications
Dressed fabric weight
ISO 3374:2000
305 g/m²
Raw fabric weight
ISO 3374:2000
255 g/m²
Nominal area of single strand (warp)
3.21 mm²
Nominal area of single strand (weft)
5.27 mm²
Net elastic modulus (warp)
32 GPa
Mesh elastic modulus (weft)
20 GPa
Residual resistance to alkaline environments after 1000 hours
≥ 85 %
Residual resistance to saline environments after 1000 hours
≥ 85 %
Residual resistance to freeze-thaw
≥ 85 %
Residual moisture resistance after 1000 hours
≥ 85 %
Glass transition temperature
TG
60 °C
Storage and conservation
Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
Warnings
The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.
