Sanaxil P - Therm
The product does not form a film, thus avoiding detachment and flaking phenomena and, while ensuring excellent water repellency, ensures high values of permeability to water vapor thanks to its porous and microcrystalline structure, perfectly compatible with mortars, plasters and all other common elements of the body masonry. Physical-mechanical performance and durability are coupled with a vast choice of colors that cannot be altered over time; characteristics which, combined with the ease and practicality of application, make the product extremely versatile and adaptable to any project requirement.
Fields of application
Protective, restorative coatings with strong antibacterial and anti-mold characteristics, based on stabilized potassium silicates, for vertical and horizontal surfaces. Heat reflective paint that helps to increase the thermal efficiency of the building.
Allowed supports
Plasters
Concrete
Cement-based or lime-based mortars
Prefabricated concrete
Paint
Preparation of supports
SUPPORTS ALREADY PAINTED WITH SILICATE PAINT
Remove any stains and proceed with painting with the silicate paint. (it is always recommended to apply a coat of silicate impregnating agent).
NEW SUPPORTS
Apply a coat of potassium silicate fixative diluted from 30/40% with water depending on the absorption of the support.
OLD SUPPORTS
On old supports, remove the old paint by brushing, fill in any holes or imperfections in the wall with a suitable filler, proceed with fixing with potassium silicate impregnating agent diluted 30/40% with water depending on the absorption of the support.
Mode of use
DILUTION (in volume with potable water)
1st COAT
BRUSH: 15% one coat crossed or two coats 12-24 hours apart
ROLLER: 10%
SPRAY (with specific equipment): 15 - 25%
2nd COAT
BRUSH: 10%
ROLLER: 10%
SPRAY (with specific equipment): 15 - 25%
Application methods
Low pressure airless nebulizer
Brush
Paint roller
Sprayer
Technical specifications
Permeability to water vapor
50 ฮผ
Coefficient of permeability
0.26
Degree of water vapor transmission
0.005 m
Consumption
Apply from 0.18 to 0.25 litres of Sanaxil P-THERM per square metre of surface to be painted.
Available colors
White
Cartella colori Azichem - silicati
Storage and conservation
Protect from freezing.
Warnings
Do not apply on surfaces in gypsum, on non-hardened surfaces, on wet or hot surfaces, with direct sunlight. Avoid prolonged direct exposure of the fresh surfaces to the wind and the sunshine.
During application, protect glass, enamelled metals, aluminium, polished tiles etc., which may be opacified by accidental contact with silicate solutions.
Colours may vary slightly depending on the temperature conditions at the time of laying and during the drying and dessication stages, the colour may be subject to slight variations.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.