Fields of application
For laying subbase screeds in high performance thermo-acoustic ecological buildings.
Preparation of supports
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
Mode of use
Pour about 2/3 of the mixing water into the mixer. Gradually add Sanalit and the water still needed, by mixing until a homogeneous lump-free mixture of the desired consistency is obtained. Support the product at the reference height and float until a smooth and planar surface is obtained, preparing the joints beforehand where necessary. The mixing water indicatively necessary is equal to 65-75% by weight (8.5 -9.5 litres per 13 kg bag).
Application methods
Finishing trowel
Pump
Spatula
Straight edge
Technical specifications
Compressive strength after 7 days
UNI EN 1015-11
4.0 MPa
Compressive strength after 28 days
UNI EN 1015-11
> 5.0 MPa
Flexural strength after 7 days
UNI EN 1015-11
1.0 MPa
Flexural strength after 28 days
UNI EN 1015-11
> 1.6 MPa
Thermal conductivity
UNI EN 1745 - EN 12664
0.21 W/mK
Capillary absorption
UNI EN 1015-18
0.50 kgโขh^0.5/mยฒ
Breathability
UNI EN 1015-19
11 ฮผ
Consumption
Approximately 6 kg/mยฒ of Sanalit for every centimetre of thickness to be implemented (approximately 600 kg per cubic metre).
Packaging and dimensions
Bag 13 kg
Pallet: 50 x (Bag 13 kg)
Storage and conservation
Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
Warnings
It is always essential to carry out preliminary tests to check the appropriateness of the product, depending on specific requirements.
Protect fresh surfaces from direct exposure to sunlight, from the rain and the wind, and cure the prolonged moist hardening.
Please note that Sanalit is only intended as a subbase for subsequent cement or lime-based slabs. It should not be used as a top trampling layer.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.
