Sanalink zoom
Sanalink image 1
Sanalink image 2
Sanalink image 3

Sanalink

Hydraulic lime and natural light aggregate based fibre-reinforced mortar

Hydraulic lime and natural light aggregate based fibre-reinforced mortar. It has high water vapor permeability characteristics, low bulk density (reduced thermal conductivity) and limited water permeability. Ideal for the construction of internal and external walls and masonry for new buildings, the renovation of existing buildings, green construction and the restoration of antique and monumental buildings.
Components
Single-component
Appearance
Powder
Customs code
3824 5090

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    EN 998-2M15
    Lines of belonging
    Linea prodotto Building
    Linea prodotto Sanageb
    Thematic site
    Sanageb
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media

    Sanalink

    Sanalink has exceptionally strong water vapour permeability and adhesive properties and a particularly low elastic modulus. Its reduced bulk density makes it particularly advantageous in determining the thermal values ​​of the masonry, thanks to the thermal conductivity values, inferior to conventional cement mortars or lime based. It has physical, chemical and aesthetic properties very similar to antique mortars and is composed of raw materials of natural origin. The combined use of natural binders, micro-fibres and light inert pozzolanic materials guarantees high quality performance in terms of ductility, chemical resistance and water vapour permeability. It can be used for brickwork, tuff, stone and mixed masonry walls and is therefore recommended for the restoration of antique masonry, green construction and, in general, quality interior and exterior constructions.
    Fields of application
    Mortar used for the construction and rehabilitation of interior and exterior masonry in solid or perforated concrete blocks, perforated bricks, solid bricks, tuff, natural stone and stone blocks in general.
    Allowed supports
    Bricks
    Mixed walls (bricks and stones)
    Brickworks
    Stone walls
    Preparation of supports
    Application surfaces must be clean, free of dust, contamination, crumbling, inconsistencies, etc., and adequately saturated-surface-dry with water.
    Mode of use
    Add approximately out 2/3 of the mixing water to the mixer and gradually add Sanalink and the rest of the water until a homogeneous, lump-free mixture of the desired consistency is obtained. The required mixing water is approximately 12-16% by weight (approximately 3.5 litres per 25 kg bag). Application can be manual (trowel) or mechanized (pumps, extruders, etc.).
    Application methods
    Brick trowel
    Tool cleaning
    Water
    Key features
    Maximum diameter of aggregate
    Maximum diameter of aggregate: 5 mm
    Mix with water
    Mix with water: 12-16 %
    Shelf-life
    Shelf-life: 12 months
    Technical specifications

    Compressive strength
    UNI EN 1015-11

    > 15 N/mm²

    Flexural strength
    UNI EN 1015-11

    > 3.5 N/mm²

    Thermal conductivity
    EN 1745

    0.45 W/mK

    Density
    UNI EN 1015-6

    1670 kg/m³

    Capillary absorption
    UNI EN 1015-18

    0.27

    Water penetration after capillary absorption
    UNI EN 1015-18

    > 1.5 mm

    Chloride content
    UNI EN 1015-17

    0.001 %

    Dry density
    UNI EN 1745

    1100 kg/m³

    Permeability to water vapor
    EN 1745

    20 μ
    Consumption
    Approximately 17 kg/m² of Sanalink for every centimetre of thickness to be implemented (approximately 1700 kg per cubic metre).
    Available colors
    Light hazel
    Packaging and dimensions
    Bag 25 kg
    Storage and conservation
    Inadequate storage of the product may result in a loss of rheological performance.
    Additional content

    Warnings
    The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation
    Key features

    Request product info

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross