Readymesh PM zoom
Readymesh PM image 1
Readymesh PM image 2
Readymesh PM image 3

Readymesh PM

Multi-filament fibre for lime based plaster, cement or mixed

Readymesh PM is an auxiliary, multi-filament polypropylene micro-fibre suitable for addition to cement conglomerates with a lime or mixed base. The addition of Readymesh PM to the mix counters the cracking phenomenon due to plastic shrinkage of the plaster, mortar, screed or concrete, as well as having positive effects on the durability of the mix, resistance to frost/defrosting and resistance to knocks and overall impermeability. Readymesh PM have the CE marking and are available in three different lengths: Readymesh PM-060 = 6 mm; Readymesh PM-120 = 12 mm; Readymesh PM-180 = 18 mm.
Components
Single-component
Appearance
Fibers
Customs code
5503 4000

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    EN 14889-2:2006 (System 3)
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Fields of application
    Readymesh PM is an auxiliary fibre used in a multitude of application fields, where three-dimensional reinforcement and diffusion of the cement conglomerate and/or lime base is required. It is a particularly indicated fibre for addition to small manufactured works or for plaster, even in small thickness and with reduced granulometry inerts.
    Allowed supports
    Plasters
    Concrete
    Cement-based or lime-based mortars
    Floor screed
    Mode of use
    Add the fibres to the conglomerate during mixing. Mix, with the drum of the cement mixer at full speed, for at least 5-6 minutes. The dosage, based on use, is normally between 600 g/m³ and 1.5 kg/m³. On average, 250 g of fibres per 200 litre building site cement mixer.
    The addition of fibres could slightly modify the rheology of the cement mix.

    Application methods
    To be added to other components
    Key features
    Density
    Density: 0.91 g/cm³
    Nonflammable
    Nonflammable
    Unlimited shelf-life
    Unlimited shelf-life
    Technical specifications
    Alkali-resistant material

    Auto-ignition temperature

    > 400 °C
    Resistant to chemical agents

    Flash-point
    ASTM D 1929

    350 °C

    Softening point

    160 - 170 °C
    Non-toxic material
    Consumption
    Variable according to the type of work to be carried out (screeds, plasters, mortars), on average from 0.6 to 1.5 kg per cubic metre of cement or hydraulic lime based conglomerate.
    Available colors
    White
    Packaging and dimensions
    Hydro degradable bag 1 kg
    PM-060 Box: 12 x (Hydro degradable bag 1 kg)
    PM-120 Box: 12 x (Hydro degradable bag 1 kg)
    PM-180 Box: 12 x (Hydro degradable bag 1 kg)
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    Features of the different Readymesh PM models:

    Fiber model Readymesh PM-060 Readymesh PM-120 Readymesh PM-180
    Fiber length  6 mm  12 mm 18 mm
    Fiber diameter 0.035 mm 0.027 mm 0.035 mm
    Elongation at break  28% -  28%
    Effect on the consistency of the concrete (Vebè) 1.0 s 2.5 s 1.3 s
    Unit weight  8.75 dTex 5.05 dTex 8.75 dTex
    Toughness 22.71 cN / tex 47.99 cN / tex 22.71 cN / tex
    Warnings
    The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation

    Request product info

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross