Properties of QL Nano Lithium K:
Hardening, sealing, consolidating, dust-proofing treatment for industrial floors and concrete screeds, both old and new.
The application surfaces must be clean, free from dirt, loose or inconsistent parts, dust, etc. In order to best open the surface porosity of the flooring, proceed with diamond grinding of the appropriate type based on the characteristics of the support. Then proceed with careful vacuuming of the dust.
Apply QL Nano Lithium K by sprayer, roller or brush on existing concrete surfaces. Always check that the concrete surfaces are suitable and capable of providing the desired results. Allow the surface to dry completely before inspecting and approving the desired application. The application time on the hardened substrate must be at least 24 hours in the summer period. Recommended 4 to 7 days during the rest of the year.
EXISTING CONCRETE SURFACES - Thoroughly clean the substrate, removing all foreign materials such as non-stick products, hardeners, release oils, dust, construction efflorescence, plaster wall residues etc. Before proceeding, ensure the surface is dry. - Use a low pressure sprayer to apply QL Nano Lithium Hard in such a way as to saturate the surface. - Allow QL Nano Lithium K to act for 20-30 minutes. - Allow the surface to dry.
Apply 0.07 to 0.10 litres of QL Nano Lithium K per square metre of surface to be treated.
