Protech Road Paint zoom
Protech Road Paint image 1
Protech Road Paint image 2
Protech Road Paint image 3

Protech Road Paint

Thick film coating specific for the protection of asphalts and bitumens

Protech Road Paint is a thick paint based on acrylic resins in aqueous emulsion for the protection and waterproofing of bituminous floors in urban and pedestrian areas. Protech Road Paint is ideal for surfaces in car parks, yards, cycle paths and sidewalks, it also increases the resistance of the floor to wear, UV rays and chemical aggression.
Components
Single-component
Appearance
Thick liquid
Customs code
3209 1000

Request product info

    By submitting I agree to the privacy notice

    Lines of belonging
    Linea prodotto Floor
    Linea prodotto Infratech
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products

    Protech Road Paint

    Protech Road Paint avoids the migration of bituminous binders and the accumulation of heat due to sunlight and allows to:
    - Reduce the disintegration, breakage and swelling of the bituminous artefact.
    - Protect the paving in bituminous conglomerate from sudden changes in temperature.
    - Increase the durability of the work.
    - Improve the aesthetics of the flooring and reduce the environmental impact
    being able to choose from various colours.
    - Noticeably reduce bitumen odours.

    Fields of application
    Protech Road Paint is formulated for the finishing and protection of manufactured products
    in bituminous conglomerate in urban and pedestrian areas such as yards, avenues and preferential lanes, sidewalks and cycle paths, sports facilities.

    Allowed supports
    Bitumen waterproofing membranes
    Asphalt
    Preparation of supports
    Remove all traces of dust and traces of oils, greasy substances and incoherent parts. On a dry support, apply Protech Road Paint according to the methods described in the instructions for use.
    Mode of use
    Protech Road Paint can be diluted with water in a percentage not exceeding 30%. The application on a dry and clean surface is done manually with a roller for a minimum of 2 coats until saturation depending on the porosity of the support. We do not recommend the application with temperatures below +10°C.
    Application methods
    Brush
    Paint roller
    Spatula
    Tool cleaning
    Water
    Key features
    Density
    Density: 1.64 ± 0.1 kg/dm³
    Dosage
    Dosage: 2.0 kg/m²
    Shelf-life
    Shelf-life: 12 months
    Temperature of use
    Temperature of use: +10 / +40 °C
    To be applied in two coats
    To be applied in two coats
    Use wearing protective glasses
    Use wearing protective glasses
    Use wearing protective gloves
    Use wearing protective gloves
    UV-resistant
    UV-resistant
    Technical specifications

    Dry residue

    75 ± 0.5 %

    Viscosity
    Brookfield

    90.000 ± 2.000 mPas

    Time before second coat at 20°C

    4 h

    Touch hardening at 20°C

    2 h
    Resistant to chemical agents
    Consumption
    Approximately 2.0 kg/m² of Protech Road Paint in two coats.
    Available colors
    Gray
    Green
    Red
    Blue
    Yellow
    Packaging and dimensions
    Can 25 kg
    Storage and conservation
    Protect from freezing.
    Additional content

    Warnings
    The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation
    Key features

    Request product info

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross