SYNTECH PROFIX

Two-component polyester-based chemical anchoring for quick fasteners

Code: RNF.0094

Components: 1

Appearance: Paste

Two-component paste, based on polyester resins, for quick structural mountings and anchorages of inserts and connectors in general. It is a rapid-hardening resin (it hardens after just 6 minutes at 20°C) that allows the use of the metal inserts after only 2.5 hours from installation.

Linee di appartenenza

General characteristics

density

Density: 1.67 - 1.77 kg/dm³

pot-life

Pot-life: 4-20 s

shelf-life

Shelf-life: 12 months

solvent-based-product

Solvent-based product

temperature-of-use

Temperature of use: +5 / +30 °C

use-wearing-protective-gloves

Use wearing protective gloves

uv-resistant

UV-resistant

Available colours

- Amber

Packaging and dimensions

- Bi-mix cartridge 400 cc

- Box: 12 x (Bi-mix cartridge 400 cc)

Characteristics

SYNTECH PROFIX is a system that is easy and quick to use that provides high performance in terms of penetration, adherence and mechanical resistance. In particular, in concrete, natural stone, full and hollow brick works etc., the resin SYNTECH PROFIX, permeates the porous systems that delimit the perforation, allows the achievement of very high admissible loads, adjustable and scalable through variations of the fastening element, the anchor depth and so on.

SYNTECH PROFIX is packaged in a two-compartment cartridge, whose special tip mixes the two components directly during extrusion, activating the polymerisation reaction instantly.

Consumption

Approximately 1.72 kg of SYNTECH PROFIX for each cubic decimetre of volume to be filled (variable according to the conditions of use).

Use fields

Fixing of connectors, bars, plates, metallic structures, fencing, shutters, gates, shelves, reinforcing rods etc., in different types of media, with particular effectiveness in the presence of concrete, natural stone, bricks, drilled (through the perfo sleeves) etc.

Preparation of supports

The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc.

Use method

The following accessories are provided for easy use of the cartridges SYNTECH PROFIX:
- Gun for resins in a cartridge with rack-and-pinion piston.
- Perfo sleeves (only for hollow masonry and perforated blocks)
- Spout mixer for two-compartment cartridges (mixing tip)

Extrude SYNTECH PROFIX in the required quantity in the fastening seat. Attach the metal insert to be anchored within a few seconds after the extrusion. Do not touch the insert for any reason until the ascertained hardening of the resin.

Application methods

- Apply by hand

- Dispensing gun

Tool cleaning

- Nitro thinner

Permitted supports

- Concrete

- Prefabricated concrete

- Wood

- Fiber-cement

- Bricks

- Tuff

- Mixed walls (bricks and stones)

- Brickworks

- Stone walls

- Floor screed

- Rock walls

Warnings, precautions and Ecology

Please note that despite SYNTECH PROFIX being composed of two components (two-component), in the header of this technical data sheet the product is presented as "monocomponent". The reason for this is that both components of the product are packaged together (single two-compartment cartridge), are inseparable and have only one Safety Data sheet which describes them both.

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Grout Power
  • Sanawarme
  • Concrete Repar