Fields of application
Adhesion promoter, surface sealant for concrete, to be applied as a substrate for works with polyureas on metal surfaces and epoxy and polyurethane coatings.
Preparation of supports
The application must take place on a dry and degreased surface; the substrate must not have crumbly or detached parts and with a degree of humidity that must not exceed 5%.
Preparation of the substrate may require some types of mechanical action: Smoothing,
bush-hammering, shot peening, hydro-washing. Other mechanical actions that can make the support suitable.
Mode of use
The individual components must be mixed carefully until a homogeneous mass is obtained. The material can be applied by roller, brush or spray by means of special airless machines, even in two coats. The temperature of the support must always be at least 3°C higher than the dew point temperature. Minimum application temperature +5°C, maximum temperature +35°C.
Application methods
Low pressure airless nebulizer
Brush
Paint roller
Technical specifications
Time before second coat at 20°C
a 23° C
max 10 h
Complete hardening at 20°C
a 23° C
7 day
Touch hardening at 20°C
a 23° C
>4 h
Consumption
Approximately 0,20 kg of Syntech Poliurea Primer – Epoxy Metal for every square metre of surface to be treated.
Packaging and dimensions
Can 10 kg [A]
Can 5 kg [B]
Kit: 1 Can 10 kg [A] + 1 Can 5 kg [B]
Storage and conservation
Protect from freezing.
Warnings
Avoid contact with skin and mucous membranes. Use appropriate protection, in particular, goggles and gloves. Do not inhale any vapours deriving from the processing of the product and if possible, ventilate the work areas.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.
Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.
The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.
Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
It is forbidden to dispose of the product and/or packaging in the environment.
