Connecting element between the pumping tube and the flat head injectors

Code: SYN.0209

Components: 1

Appearance: Mechanical device

Specific accessory for use in conjunction with the flat head injectors, for sealing the infiltration of water through the use of specific water-reactive polyurethane resins SYNTECH H.A.G., with hand and electrical pumps.

Linee di appartenenza

General characteristics


Diameter: 23 mm


Lenght: 28 mm




Unlimited shelf-life

Available colours

- Steel

Packaging and dimensions

- Bulk material 1 unit


Product to buy as needed.

Use fields

Stop the infiltration of pressurised water in buildings by targeted injection of hydro-expansive polyurethane resins or fluid epoxy resins (SYNTECH IC 55).

Use method

Screw the connector on the end of the high-pressure hose supplied with both manual and electric pumps, specific for masonry injections. "Clip" the connector to the "flat head" of the injector. Proceed with the injection operations.

Application methods

- Apply by hand

Tool cleaning

- Nitro thinner

Permitted supports

- Concrete

- Prefabricated concrete

- Bricks

- Tuff

- Mixed walls (bricks and stones)

- Stone walls

- Rock walls

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter


Products on display

  • Sanawarme
  • Grout Power
  • Osmocem