STABILSANA

Additional stabilizer compound for the construction of ecological roads

Code: ADX.0183

Components: 1

Appearance: Powder

Additional natural compound to be added to mixtures packaged with displaced earth (or stabilised quarry substances) and hydraulic binders (hydraulic lime, white cement, etc.), for the construction of trails and roads, including driveways, and the implementation of road works in stabilised earth, with "clay" effect, for zero environmental/landscape impact.

NOTICE
STABILSANA è prodotto in esclusiva per TERRA SOLIDA
Promotec srls Unipersonale - Via Malignani, 33 – 33080 - Fiume Veneto (Pordenone)
Tel. +39 0434 954014 – Email: info@terrasolida.it – Web site: www.terrasolida.it

Linee di appartenenza

General characteristics

material-100-eco-friendly

Material 100% eco-friendly

min-recommended-thickness

Min. recommended thickness: 10-12 cm

nonflammable

Nonflammable

shelf-life

Shelf-life: 6 months

Available colours

- White

Packaging and dimensions

- Bag 25 kg

- Pail 5 kg

Characteristics

The addition of STABILSANA dissolved in water, by reason of 1.0 kg of product per cubic metre of aggregate alkaline mix, is aimed at the homogenization of the earth/binder mixture, the inerting and labilisation of organic films that surround the soil particles, the conversion of the latter in colloidal substances that will contribute to the cohesion of the final conglomerate, as well as the improvement of the efficiency and the mechanical performance of the natural conglomerate on site as a whole.

Depending on the destination of use, you must modulate the ratio between the main components: hydraulic binder (cement or lime), soil material, stabilizer for land "Stabilsana" and water.

Use fields

Cycle paths, footpaths, rural roads, forest roads, trails in parks and gardens, cemetery roads, sports facilities, play areas, car parks, golf courses, large squares, archaeological sites.

Preparation of supports

The road works, produced with the Stabilsana technology should be appropriately prepared equivalently to any road in bituminous asphalt or cement, in relation to the preparation of the subbase and the screed, to the slopes, the regimentation of rainwater, etc.

Use method

In general, the construction of a natural road paving with the system Stabilsana involves the following phases:
i) mixing soil conglomerate with water, binder and Stabilsana (1.0 kg/m³)
ii) preparation of the final conglomerate with vibratory finishing on suitably prepared subbase
iii) rolling and compaction of the road iv) care of hardening.

For more information see the website dedicated to technology www.stabilsana.com or contact our Technical Service.

Application methods

- To be added to other components

Tool cleaning

- Water

Warnings, precautions and Ecology

It is always essential to carry out preliminary tests for an accurate definition of the mixtures to use, and to check the suitability of the product on the basis of the specific requirements.

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Exclusive Distributor

STABILSANA è prodotto in esclusiva per Terra Solida

Products on display

  • Sanawarme
  • Opus Dry
  • Grout Power