SQUADRETTA CON TASSELLI

Five-hole bracket with fastening dowels

Code: RNF.0390

Components: 1

Appearance: Connector

Five-hole BRACKET in galvanised steel with nylon fastening dowels. It is a fundamental fastening accessory in the RINFOR SYSTEM 1 and 2 to prevent slab detachment.

Linee di appartenenza

General characteristics

unlimited-shelf-life

Unlimited shelf-life

width

Width: 35 mm

lenght

Lenght: 120 mm

use-wearing-protective-gloves

Use wearing protective gloves

Technical specifications

Alkali-resistant material

Available colours

- Steel

Packaging and dimensions

- Bulk material 1 unit

Characteristics

The BRACKET in galvanised steel is used to fasten the ARMAGLASS STRUCTURA mesh where they overlap on the wall in the systems for preventing slab detachment. The dimensions of the bracket are calibrated on the openings of the ARMAGLASS STRUCTURA mesh, thus ensuring effective locking. The DOWEL is made of age-resistant nylon and can be used in a wide range of temperatures (from -40° C to +80° C). The expansion of the DOWEL when inserting the galvanised screw and the effective anti-rotation wing, which lock the dowel within the hole during installation, ensure a robust and tenacious seal, both on solid or concrete bricks and hollow bricks. The DOWEL accessory has a collar around the top that prevents the DOWEL from penetrating the hole. The galvanised screw offers excellent resistance to corrosion.
Nylon dowel:
Diameter 8 mm — Length 40 mm
Colour: Red
Zinc-plated Screw:
Diameter 5 mm — Length 70 mm
Colour: galvanised

Consumption

At least one BRACKET every 50 centimetres or so, with two fastening DOWELS (see RINFOR SYSTEM 1 and 2 in our technical literature).

Use fields

In preventing slab detachment, the BRACKET is a robust and economical fastening element in the ARMAGLASS STRUCTURA network in the RINFOR SYSTEM 1 and 2.

Use method

Attach the ARMAGLASS STRUCTURA mesh in the area of overlap in the wall with the specific galvanised steel bracket with five holes, fastening by means of a nylon dowel and galvanised steel screw. The substrate must be dry to allow for an effective hold of the DOWEL. For clarification on the positioning of the BRACKET, see the drawings in our RINFOR SYSTEM 1 and 2 technical literature.

Application methods

- Apply by hand

- To be added to other components

Permitted supports

- Bricks

- Brickworks

- Cement-based or lime-based mortars

- Concrete

- Wood

Contact us now

Want to know more about our products?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Opus Dry
  • Syntech Poliurea
  • Syntech H.A.G.