SEALGUM

Waterstop in hydro-expanding rubber

Code: PRS.0244

Components: 1

Appearance: Stripe

Hydro-expanding waterstop sealant with a special mix of natural and synthetic rubbers and hydrophilic agents: in contact with water, it increases up to triple its volume compared to the original size. SEALGUM is a simple waterstop easy to use, not requiring particular preparation on the supports, pre-shaped compartments, etc.. SEALGUM waterstops are available in three different sections: SEALGUM 20.05 = 20x5 mm; SEALGUM 20.10 = 20x10 mm; SEALGUM 20.20 = 20x20 mm.

Customs Code

4006 9000

Linee di appartenenza

General characteristics

Hydroexpansive product: > 500 %

Shelf-life: 12 months

Density: 1.26 kg/dm³

Technical specifications

Fire resistance

B 2 _

Hardness

36 _

Resistance to water pressure

5 bar

Available colours

- Blue

Packaging and dimensions

- Box: 5 x (SEALGUM 20.05 Roll 10 m)

- Box: 7 x (SEALGUM 20.10 Roll 10 m)

- Box: 7 x (SEALGUM 20.20 Roll 5 m)

- SEALGUM 20.05 Roll 10 m

- SEALGUM 20.10 Roll 10 m

- SEALGUM 20.20 Roll 5 m

Consumption

1.1 m/m: Use 1 metre of SEALGUM for each linear metre, being careful to place 5-10 cm of the product alongside the end/start roll points to guarantee the permanent water tightness of the system.

Use fields

Creation of castings and connections with safe and permanent hydraulic hold.

Preparation of supports

Take care to create the laying site of the waterstop as smooth and even as possible. Remove any flaking, inconsistent, dusty, etc. parts.

Use method

SEALGUM must be spread on the laying surface and fastened using nails (steel nails plus water approx. every 25 cm). Sealing of the joints is ensured by simple placement side by side and not overlapping the ends. Positioning must guarantee good coverage of 10-12 cm by the concrete, to contain the expansive action generated by hydration.

For particularly disconnected or rough surfaces, you can position SEALGUM with the help of a hydro-expanding sealant in a cartridge FLEXSEAL 300.