SANAXIL FIX

Reinforcing fixative primer based on potassium silicates

Code: PRT.0171

Components: 1

Appearance: Liquid

Reinforcing, fixative, transparent primer, based on stabilised potassium silicate for the preliminary treatment of the surfaces to be painted and/or plastered with silicate-based, lime putty, systems, for ecological building interventions, new buildings and for the restoration of vintage buildings and monuments.

Linee di appartenenza

General characteristics

density

Density: 1.278 kg/dm³

shelf-life

Shelf-life: 12 months

solvent-free

Solvent-free

temperature-of-use

Temperature of use: +5 / +30 °C

use-wearing-protective-glasses

Use wearing protective glasses

use-wearing-protective-gloves

Use wearing protective gloves

Technical specifications

Deep hardening

24-48 h

Hard to touch

6 h

Available colours

- Transparent

Packaging and dimensions

- Plastic can 5 l

- Plastic can 20 l

Characteristics

SANAXIL FIX is a product consisting of potassium silicates. It is highly breathable and is not subject to thermoplastic effects. It does not contain resins, solvents, thinners and harmful or toxic emanations. Free of V.O.C.

Consumption

Apply from 0.10 to 0.15 litres of SANAXIL FIX per square metre of surface to be treated.

Use fields

"Priming" fixative treatment of coatings, paints or putty coat based on lime putty, potassium silicate and siloxanes in general. Dust-proofing, reinforcing, cortical treatment for surfaces of pulverising plaster.

Preparation of supports

Organic type paints (washable, solvent-based etc.) where present, must be thoroughly removed. The support should, in any case, be, clean, homogeneous, compact, dust-free.

Use method

SANAXIL-FIX can be applied to substrates in masonry, on cement surfaces, lime-based surfaces, on well anchored mineral paints. They can be applied by brush, roller or spray: the number of coats required and the most appropriate dilution ratio with water will be determined as a function of the absorption conditions and degradation of the support. The admissible dilution range provides for additions of water up to a maximum ratio of 1:1.

Application methods

- Brush

- Paint roller

- Sprayer

Tool cleaning

- Water

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Fiber-cement

- Bricks

- Mixed walls (bricks and stones)

- Stone walls

- Floor screed

- Paint

Warnings, precautions and Ecology

Do not apply on surfaces in gypsum, on surfaces that are not cured, on moist or hot surfaces, with direct solar radiation.

During application, protect glass, enamelled metals, aluminium, polished tiles etc., which may be opacified from accidental contact with silicate solutions.

Handle following the safety guidelines on the packaging: use with protective gloves and goggles.

SANAXIL FIX can be pigmented with several colour variations and is recommended for colour stability over time.

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Syntech H.A.G.
  • Syntech Poliurea
  • Sanawarme