Explore products

Integrated solutions

Guide to selection

Themed sites

SANAVEL
Non-toxic paint, breathable,based on potassium silicate, to be used indoor
SANAVEL
Non-toxic paint, breathable,based on potassium silicate, to be used indoor
SANAVEL
Non-toxic paint, breathable,based on potassium silicate, to be used indoor

SANAVEL

Non-toxic paint, breathable,based on potassium silicate, to be used indoor

Code: PRT.0168

Components: 1

Appearance: Liquid

Breathable, natural, non-toxic, indoor paint, based on potassium silicate. Mineral-based, active formulation, high mildewcide and anti-condensation performance, prepared according to traditional recipes, for use in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments.

Customs Code

3209 9000

Linee di appartenenza

General characteristics

Density: 1.61 kg/dm³

Shelf-life: 12 months

Solvent-free

Temperature of use: +5 / +30 °C

To be applied in two coats

Technical specifications

Breathability

7.5 μ

Dry residue

58 %

Wet abrasion resistance

3 _

Available colours

- White

Packaging and dimensions

- Pail 4 l

- Pail 14 l

Characteristics

SANAVEL consists of potassium silicate, natural pigments. It has very high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances and toxic emissions in general, and does not have thermoplastic effects.

Consumption

Apply from 0.30 to 0.40 liters of SANAVEL per square metre of surface to be painted.

Use fields

Restoring and decorative paint for interior environments.

Preparation of supports

Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc. Pre-existing paints (washable, organic, solvent based etc. ) must be thoroughly removed.

Preliminarily treat the support with the fixative SANAXIL FIX.

Use method

Apply by brush, roller or spray. SANAVEL is "dust-free" (it has started to be consistent to the touch) after about 1 hour. It can be overcoated after 4-5 hours, while it will be dry in-depth after 10-12 hours.

Application methods

- Brush

- Paint roller

- Sprayer

Tool cleaning

- Water

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Prefabricated concrete

- Paint

Warnings, precautions and Ecology

Do not apply on surfaces in gypsum, on non-hardened surfaces, on wet or hot surfaces, with direct sunlight. Avoid prolonged direct exposure of the fresh surfaces to the wind and the sunshine.

During application, protect glass, enamelled metals, aluminium, polished tiles etc., which may be opacified by accidental contact with silicate solutions.

Colours may vary slightly depending on the temperature conditions at the time of laying and during the drying and dessication stages, the colour may be subject to slight variations.