Reactive solution of mineral silicates, capable of forming, by reaction with the salts and lime hydrates present in the masonry, stones, binding compounds and stabilisers, specific for curing treatments prior to subsequent plastering or smoothing, of powdery bedding plasters and mortars and wall coverings in general, for ecological building interventions and in the restoration of vintage buildings and monuments.
Shelf-life: 12 months
Use wearing protective glasses
Material 100% eco-friendly
Temperature of use: +8 / +30 °C
Use wearing protective gloves
Density: 1.03 kg/dm³
- Plastic can 5 kg
- Plastic can 10 kg
- Plastic can 25 kg
SANASTARK is a solution based on mineral silicates, demineralised water and natural dispersant. It does not contains traces of resins, solvents or thinners. The application of SANASTARK does not affect the original wall breathability.
From 0.20 to 0.30 kg of SANASTARK for each square metre of surface to be treated, based on the porosity of the support.
Cortical reinforcement and elimination of pulverisation of mortars, plasters and masonry jointing. Also suitable as a natural fixative before applying lime putty- or potassium silicate-based plasters and paints.
Remove the soilings and saline manifestations by vigorous brushing. Then eliminate the residual dust. Saturated with water until you reach the condition of "saturated with dry surface".
Apply by spraying, proceeding from the bottom up: it can also be applied with a brush with natural long bristles. In the presence of pronounced degradations proceed with several applications, wet on wet.
- Low pressure airless nebulizer
- Cement-based or lime-based mortars
- Mixed walls (bricks and stones)
- Stone walls
It can cause the opacification of aluminium surfaces, glass, ceramised tiles etc. which must therefore be protected during application.
Do not apply on mineral surfaces (plaster, bricks etc.), destined to remain exposed, without carrying out a preliminary test, as there is a risk of latent salt crystallisation.
SANASTARK is a moderately caustic solution at the implementation stage: do not ingest, wear protective gloves, goggles and clothing, take the necessary precautions.
CONSILEX SAN HG
Recommended for through re-alkalisation (reviving alkalinity) of the entire surface of the manufactured piece in concrete to restore. The action exerted is more diffused and penetrating than CONSILEX SAN.
Specifically for re-alkalisation (reviving alkalinity) of the only portions of concrete to restore. The re-alkalisation action is millimetric.