Sanascreed zoom
Sanascreed image 1
Sanascreed image 2
Sanascreed image 3

Sanascreed

Ready-to-use conglomerate, for building lime-based slabs and screeds

Walkable screed based on hydraulic lime, silico-calcareous aggregates with a maximum grain size of 5 mm and light aggregates with pozzolanic activity, fiber-reinforced with polypropylene and glass microfibres, used for the construction, with the addition of water, of resistant screeds and substrates , in green building interventions and in the restoration of period and monumental buildings.
Components
Single-component
Appearance
Powder
Customs code
3824 5090

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    EN 998-1
    Lines of belonging
    Linea prodotto Building
    Linea prodotto Floor
    Linea prodotto Sanageb
    Thematic site
    Sanageb
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products
    Fields of application
    Laying slabs and screeds based on hydraulic lime.
    Allowed supports
    Concrete
    Preparation of supports
    Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
    Mode of use
    Pour about 2/3 of the mixing water into the mixer. Gradually add Sanascreed and the water still required, continue to mix until a homogeneous, lump-free mixture of the desired consistency is obtained. Support the product at the reference height and float until a smooth and planar surface is obtained, preparing the joints beforehand where necessary. The mixing water indicatively necessary is equal to 18-20% by weight (4.5 -5 litres per bag 25 kg).
    Application methods
    Finishing trowel
    Pump
    Spatula
    Straight edge
    Tool cleaning
    Water
    Key features
    Maximum diameter of aggregate
    Maximum diameter of aggregate: 5 mm
    Min. recommended thickness
    Min. recommended thickness: 2 cm
    Mix with water
    Mix with water: 18-20 %
    Pot-life
    Pot-life: 60 min
    Temperature of use
    Temperature of use: +6 / +30 °C
    Technical specifications

    Compressive strength after 1 day
    UNI EN 1015-11

    > 5 MPa

    Compressive strength after 7 days
    UNI EN 1015-11

    > 18 MPa

    Compressive strength after 28 days
    UNI EN 1015-11

    > 24 MPa

    Flexural strength at 1 day
    UNI EN 1015-11

    > 1.5 MPa

    Flexural strength after 7 days
    UNI EN 1015-11

    > 4.5 MPa

    Flexural strength after 28 days
    UNI EN 1015-11

    > 5.5 MPa

    Density
    UNI EN 1015-6

    1950 kg/m³

    pH

    12

    Static elastic modulus
    EN 13142

    14000 MPa

    Bonding force
    UNI EN 1015-12

    > 1.2 MPa
    Consumption
    Approximately 17 kg/m² of Sanascreed for every centimetre of thickness to be implemented (approximately 1700 kg per cubic metre).
    Available colors
    Light hazel
    Packaging and dimensions
    Bag 25 kg
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    Warnings
    It is always essential to carry out preliminary tests to verify the appropriateness of the product, depending on specific requirements.

    Protect fresh surfaces from direct exposure to sunlight and cure the protection and moist hardening.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation

    Richiedi info sul prodotto

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross