SANAKOLL

Adhesive based on hydraulic lime for bondings, coatings and finishing coats

Code: FLR.0147

Components: 1

Appearance: Powder

Adhesive monocomponent plaster, based on hydraulic lime, for bonding tiles etc., on hardened and compact building supports; also specific for the installation of wood-magnesium panels, cork panels and other types of ecological modular panels, in the construction of "natural coats" (internal and external), for ecological building interventions and in the restoration of vintage buildings and monuments.

Linee di appartenenza

General characteristics

maximum-diameter-of-aggregate

Maximum diameter of aggregate: 0.3 mm

mix-with-water

Mix with water: 16-18 %

pot-life

Pot-life: 60 - 75 min

shelf-life

Shelf-life: 12 months

temperature-of-use

Temperature of use: +6 / +30 °C

Technical specifications

Bonding force

1.5 N/mm²

Breathability

12 - 13 μ

Compressive strength

> 17 N/mm²

Density

1650 kg/m³

Flexural strength

> 5 N/mm²

Available colours

- Light hazel

Packaging and dimensions

- Bag 25 kg

Consumption

Use from 3 to 5 kg/m² of SANAKOLL depending on the type of support and the type of material to be bonded.

Use fields

Bonding tiles, ascertained to be porous, averagely absorbent and absolutely not clinkerised (use only for interior floor coverings). Bonding and smoothing coating of panels and modular elements in mineralised wood, cork, etc.

Preparation of supports

The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed.

Use method

Gradually pour about 2/3 of the mixing water into the mixer, Gradually add SANAKOLL and the water still required, continue to mix until a completely lump-free mixture is obtained. The methods of use are differentiated based on the support materials and the specific destination of use.

For bonding on ordinary, absorbent, internal subbases, spread the product with a toothed adhesive spreader in continuous layers of adequate thickness and then lay on site the elements to be installed (tiles, panels, etc.), with the appropriate and usual methods, exerting the pressure required to promote adhesion.

Application methods

- Notched finishing trowel

Tool cleaning

- Water

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Floor screed

Warnings, precautions and Ecology

Protect fresh surfaces from direct exposure to sunlight, from the rain and the wind, and cure the prolonged moist hardening.

Preliminarily ascertain the necessary mechanical strength of the support.

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Syntech H.A.G.
  • Sanageb
  • Floortech Prerit