Adhesive, thixotropic, reinforced fibre compound, based on hydraulic lime, reinforced fibre, fast-curing, for fastening and anchorage, of wall bodies, structures, inserts, plates, frames, bars, sanitary, etc., in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments.
Density: 1.800 kg/dm³
Maximum diameter of aggregate: 2 mm
Mix with water: 15-16 %
Pot-life: 15 min
Shelf-life: 6 months
Temperature of use: +6 / +30 °C
Use wearing protective gloves
Hard to touch
- Bag 25 kg
- Pallet: 50 x (Bag 25 kg)
SANAFIRM consists of hydraulic lime, botticino, quartz sands, kaolin, aluminates and natural fibres. It does not contain cement, resins, solvents and radioemissive elements.
Approximately 1.6 kg of SANAFIRM for each cubic decimetre of volume to be filled.
Fixing and anchoring, in wall bodies, plates, door and window frames, washbasins and sanitary ware in general, bars, clamps, connectors, and metal inserts etc.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
Pour about 2/3 of the mixing water into the mixer; gradually add SANAFIRM and the water still required, continue to mix until a homogeneous lump-free mixture of the desired consistency is obtained. Apply with brick trowel or filling knife. The mixing water indicatively necessary is equal to 15-16% by weight (3.5 -4 litres per bag 25kg).
- Brick trowel
- Cement-based or lime-based mortars
- Mixed walls (bricks and stones)
- Stone walls
- Floor screed
It is recommended to mix only the material immediately needed, given the short pot life of the product.