SANAFAST
Setting and hardening accelerator
Code: ADX.0270
Components: 1
Appearance: Powder
SANAFAST is a specially formulated premix that, added during the mixing phase to our mortars (REPAR, GROUT, FLOOR, RINFOR lines) and to our natural hydraulic lime-based injection products (SANAFLUENS, MIKROSANA), allows to accelerate the setting and hardening, with a much faster development of mechanical strength.
Range
Customs Code
Linee di appartenenza
General characteristics
Temperature of use: +5 / +35 °C
Use wearing protective gloves
Shelf-life: 12 months
Nonflammable
Available colours
- White
Packaging and dimensions
- Bag 25 kg
- Pail 10 kg
Characteristics
SANAFAST is formulated with a fast-setting binder and very fine mineral fillers, perfectly compatible with Portland cements, pozzolanic cements and natural hydraulic lime.
Consumption
SANAFAST can be mixed in any proportion with any hydraulic binder.
Use fields
Adaptation (acceleration) of the setting times of mortars and plasters, to be used when environmental and meteorological conditions would make them too "slow" compared to the requirements of use: for example in the winter period when temperatures are low.
Use method
Careful dry premixing of SANAFAST with the product for which an acceleration of setting and hardening times is always recommended.
Application methods
- To be added to other components
Tool cleaning
- Water
Permitted supports
- Cement-based or lime-based mortars
Contact us now
Want to know more about our products?
Technical Data Sheet [ITA]
