Explore products

Integrated solutions

Guide to selection

Themed sites

SANAFARBE P
Non-toxic breathable paint based on lime putty, for indoor and outdoor
SANAFARBE P
Non-toxic breathable paint based on lime putty, for indoor and outdoor
SANAFARBE P
Non-toxic breathable paint based on lime putty, for indoor and outdoor

SANAFARBE P

Non-toxic breathable paint based on lime putty, for indoor and outdoor

Code: PRT.0152

Components: 1

Appearance: Liquid

Breathable, natural, non-toxic paint, for internal and external surfaces, diffusive type, based on lime putty. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments.

Customs Code

3209 9000

Linee di appartenenza

General characteristics

Density: 1.30 kg/dm³

Dosage: 0.35 - 0.40 l/m²

Temperature of use: +8 / +30 °C

Shelf-life: 12 months

Solvent-free

Technical specifications

13 _

Coefficient of permeability

125 μ

Wet abrasion resistance

2 _

Dry residue

59.40 %

Available colours

- White

Packaging and dimensions

- Pail 14 l

- Pail 4 l

Characteristics

Product based on lime putty and natural pigments.

SANAFARBE P has a high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general.

Consumption

Apply from 0.20 to 0.40 liters of SANAFARBE P per square metre of surface to be painted.

Use fields

Decorative and internal and external restoration paint.

Preparation of supports

The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, SANAXIL FIX primer, based on potassium silicate. The application of SANAXIL FIX can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio.

Use method

Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours.

It allows the easy reproduction of traditional finish type: sponging, rubbing, marbling, infilling. SANAFARBE P is dry to the touch after 2 hours, it can be overcoated after 4 hours, while it will be dry in-depth after 8-16 hours.

Application methods

- Brush

- Paint roller

- Sprayer

Tool cleaning

- Water

Permitted supports

- Cement-based or lime-based mortars

- Drywall

- Plaster (gypsum)

- Plasters

Warnings, precautions and Ecology

The colours may vary slightly depending on the temperature conditions at the time of laying and during the drying and dessication steps.

Avoid prolonged direct exposure of the fresh surfaces to the wind and the sunshine.