Mineral plaster for exteriors and interiors, based on lime putty, dust and granulometrically balanced marble grain, mineral pigments and specific agents, for the uniforming preparation of rough or wrinkled screeds, for ecological building interventions, new buildings and in the restoration of vintage buildings and monuments. Specific preparation for subsequent application of SANAFARBE MARMORINO FINITURA.
Shelf-life: 12 months
To be applied in three coats
Density: 1.49 kg/dm³
Max. recommended thickness: 1.5 mm
Temperature of use: +8 / +30 °C
Hard to touch
- Pail 25 kg
The long hardening lime putty, used as a binder, confers distinct breathable, antiseptic and anti-mildew properties. The high aptitude for polishing with spatula exalts the aesthetic, repellent and anti-fouling properties. The marble grain gives a pleasant dotted polychrome appearance.
The special formula of SANAFARBE MARMORINO FINITURA, based on long hardening lime putty, marble dust, natural pigments and minerals, gives great breathability, mildewcide and antibacterial properties to the coating.
From 1.0 to 1.3 kg of SANAFARBE MARMORINO FONDO for each square metre of surface to be covered.
Smoothing of rough media prior to the application with marbled effect of SANAFARBE MARMORINO FINITURA. Super smooth finish to apply on SANASTOF as an alternative to the plaster finish.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
SANAFARBE MARMORINO FONDO is ready to use, in the form of a thixotropic paste and must be applied with stainless steel trowel, and in two or three coats, depending on the desired level of coverage. The last coat, unless it is provided for additional finishes, must be smoothed carefully, with a spatula or stainless steel trowel, when the product begins to dry. SANAFARBE MARMORINO FONDO can be applied to internal and external surfaces. In the case of cement plaster or lime, like in pre-existing lime-based paints, as long as they are compact and not crumbly, apply directly. Any organic type paints (washable, solvent, etc.) must be removed. Where the subsequent application of SANAFARBE MARMORINO FINITURA is planned, do not proceed with this smoothing.
- Cement-based or lime-based mortars
To avoid anti-adhesive effects and possible consequent detachments, take all due care to avoid "polishing" between one coat and the next. Avoid application in the presence of rainfall and high humidity.
Colours may vary slightly depending on temperature conditions at the time of spreading and during the drying and dessication phases.
PROTECH SIL I
Classic siloxane putty. Breathable, resistant and totally water repellent. Recommended product!
It is classic lime putty; a non-toxic product, breathable and totally natural and ecological. Reliable, efficient and convenient!
SANAFARBE MARMORINO FINITURA
it is classic putty to create finishes with a Marmorino effect. Breathable, natural and ecological.
Classic potassium silicate putty. Natural, ecological and breathable. Offers better performance than SANAFARBE I.