REPAR TIX SPEEDY HP

Fast hardening, thixotropic cement mortar

Code: REP.0137

Components: 1

Appearance: Powder

Structural, rheoplastic, thixotropic cement mix with controlled shrinkage, with adequate super-pozzolanic filler additives, hold accelerators and glass micro-fibres. The mix is equipped with very fast hold, excellent workability and excellent adhesion on cement supports to re-build. The product was mainly designed for small/medium repairs and reconstructions in environments where the fastness of application is important, such as works on roads, ports and airports.

Linee di appartenenza

Certification obtained and Standards

Products and systems for the protection and repair of concrete structures - Structural and non-structural repair (R4)

EN 1504-3

Products and systems for the protection and repair of concrete structures - Structural and non-structural repair (R4)

General characteristics

density

Density: 2.105 kg/dm³

max-recommended-thickness

Max. recommended thickness: 5 cm

maximum-diameter-of-aggregate

Maximum diameter of aggregate: 0.7 mm

mix-with-water

Mix with water: 16 - 18 %

pot-life

Pot-life: 10 - 15 min

shelf-life

Shelf-life: 12 months

Technical specifications

Adhesion to substrate

2 N/mm²

Chloride content

< 0.01 %

Compressive strength after 01 day

> 15 N/mm²

Compressive strength after 03 days

> 35 N/mm²

Compressive strength after 07 days

40 N/mm²

Compressive strength after 08 hours

> 7 N/mm²

Compressive strength after 28 days

> 45 N/mm²

Flexural strength after 28 days

> 8.5 N/mm²

Flexural strength at 01 day

> 3.5 N/mm²

Setting time

40-60 min

Static elastic modulus

21000 N/mm²

Available colours

- Gray

Packaging and dimensions

- Bag 25 kg

Consumption

Approximately 19 kg/m² of REPAR TIX SPEEDY HP for every centimetre of thickness to be implemented (approximately 1900 kg per cubic metre).

Use fields

Suitable for surface regulation and reconstruction works on missing sections and cavities, especially in works involving structural renovation of worn concrete. Volumetric reconstruction of concrete cover on structures in reinforced concrete or prefabricated ashlars.

Preparation of supports

Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

Use method

Pour about 2/3 of the mixing water into the mixer, add REPAR TIX SPEEDY HP and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16 - 18% of the weight of the bag.

Having finished mixing, immediately use the product for the works necessary, paying attention to its fast hardening. You are advised to use a little product at a time, only the quantity usable within 10 minutes after mixing (attention, the ambient temperature can also considerably affect the hold time of the product!).

Application methods

- Brick trowel

- Spatula

Tool cleaning

- Water

Permitted supports

- Concrete

- Prefabricated concrete

- Asphalt

Warnings, precautions and Ecology

Do not apply in case of direct exposure to sunlight and/or excessive ventilation. Cure the protection and the prolonged moist hardening of exposed surfaces. Given the short setting time, it is recommended to prepare small amounts of product at a time, to avoid waste and scraps.

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Osmocem
  • Syntech H.A.G.
  • Readymesh