REPAR TIX SFR
Structural thixotropic, shrinkage-compensated, reinforced fibre mortar
Code: REP.0135
Components: 1
Appearance: Powder
High-performance, thixotropic, structural cementitious mortar, fiber-reinforced with a mix of metal microfibers (length = 6 mm, diameter = 0.22 mm) and alkaline-resistant synthetic microfibers, used for the restoration and thickening of reinforced concrete structures and in masonry, even in severe exposure environments (marine, industrial, cyclically dry and wet).
Functional categories
Customs Code
Linee di appartenenza
Certification obtained and Standards
EN 1504-3
Products and systems for the protection and repair of concrete structures - Structural and non-structural repair (R4)
General characteristics
Dosage: 1.9 kg/dm³
Max. recommended thickness: 50 mm
Maximum diameter of aggregate: 1.5 mm
Min. recommended thickness: 8 mm
Mix with water: 20-22 %
Nonflammable
Pot-life: 60 min
Shelf-life: 12 months
Temperature of use: +5 / +35 °C
Use wearing protective gloves
Technical specifications
Adhesion to substrate
> 3 MPa
Bonding force
2.8 N/mm²
Capillary absorption
0.48 kg•h^0.5/m²
Chloride content
<0.01 %
Coefficient of permeability
10⁻¹² m/s
Compressive strength after 01 day
≥ 25 N/mm²
Compressive strength after 07 days
≥ 50 N/mm²
Compressive strength after 28 days
≥ 70 N/mm²
Determination of thermal compatibility
2.4 mPa
Flexural strength after 28 days
≥ 9.5 N/mm²
Reaction to fire
A1 _
Resistance to carbonatation
0.5 mm
Skid resistance
56.0 mm
Static elastic modulus
24000 N/mm²
Available colours
- Gray
Packaging and dimensions
- Bag 25 kg
- Pallet: 50 x (Bag 25 kg)
Characteristics
REPAR TIX SFR consists of special cements, silica fume, anti-shrinkage agents, specific additives and selected aggregates, high-performance in terms of adhesion, adherence, mechanical resistance, intrinsic watertightness, dimensional stability and overall hardness. REPAR TIX SFR is added with a mix of amorphous metal fibres of 30 mm (≥0.9% by weight) and multifilament synthetic fibres of 6 mm (≥0.08% by weight).
Consumption
Approximately 19 kg/m² of REPAR TIX SFR for every centimetre of thickness to be implemented (approximately 1900 kg per cubic metre).
Use fields
Restorations, repairs and consolidations, even of considerable thicknesses and dimensions, on reinforced concrete and masonry structures. Reinstatement and reconstruction of the concrete cover on heavily deteriorated reinforced concrete works, even in particularly demanding and heavily stressed environments (marine, industrial, purification plants, hydraulic pipes). Reliable and durable structural consolidation of road structures (bridges, viaducts, tunnels, etc.). Reinforcement hoods on vaulted wall structures. Reinforcements and seismic adjustments in combination with structural glass fiber meshes from the ARMAGLASS line, ARMAGLASS CONNECTOR glass fiber connectors, helical bars in HELIX STEEL AISI 304 stainless steel.
Preparation of supports
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes).
Use method
Pour about 2/3 of the mixing water into the mixer, add REPAR TIX SFR and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 20-22% of the weight of the bag. After mixing is completed wait a few minutes before applying.
Place on site by rendering or using plastering /or shotcrete machines, use product quantities appropriate for the specific requirements of the construction site .
Application methods
- Finishing trowel
- Shotcrete machine
- Plastering machine
- Spatula
- Brick trowel
Tool cleaning
- Water
Permitted supports
- Plasters
- Concrete
- Cement-based or lime-based mortars
- Prefabricated concrete
- Mixed walls (bricks and stones)
Warnings, precautions and Ecology
Adopt the necessary care and moist hardening procedures of exposed surfaces that must be protected from rain, from direct sunlight, ventilation, etc.
Contact us now
Want to know more about our products?
Share
Technical Data Sheet [ITA]
Technical Data Sheet [ESP]
Technical Data Sheet [POR]
Technical Data Sheet [DEU]
Technical Data Sheet [FRA]
Technical Data Sheet [RUM]Alternative products
REPAR TIX G2
Thixotropic cement mortar, shrink-proof, moderately expansive. Specifically for the filling of vacuums in the grouting of metal or wooden structures on vertical walls.
REPAR TIX
Structural, thixotropic, fibre reinforced monocomponent cement mortar It is classic mortar for renovation of concrete, efficient, reliable and cheap!
REPAR TIX BIC
Structural, thixotropic, fibre reinforced, two-component cement mortar Compared to REPAR TIX it is more adhesive with high waterproofing and moderately deformable.
REPAR TIX HG
Structural, thixotropic, fibre reinforced, monocomponent cement mortar with high performance. Specifically for marine, mountain and aggressive environment applications in general. Also ideal for wet shotcrete. Highly recommended!
REPAR TIX SPEEDY HP
Super rapid hardening mortar (about 20 '), specific for maintenance works on road works and the like.
