Code: REP.0136
Components: 1
Appearance: Powder
Thixotropic, structural, fibre reinforced cement mortar with high intrinsic watertightness, and extraordinary physical and mechanical characteristics: adhesion to concrete, adhesion to steel, compression resistance, flexural strength, abrasion resistance. Perfect for remediation of structural works and articles in degraded concrete and very high performance coatings. Thanks to the very high adhesion to steel and concrete supports, it is also suitable for fixing threaded bars in holes made on concrete or rock conglomerates. Apply with brick trowel and plastering trowel.
EN 998-1
Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)
EN 1504-3
Products and systems for the protection and repair of concrete structures - Structural and non-structural repair (R4)
Max. recommended thickness: 40 mm
Shelf-life: 12 months
Use wearing protective gloves
Temperature of use: +5 / +35 °C
Mix with water: 16 %
Highlighted product
Maximum diameter of aggregate: 1.5 mm
Min. recommended thickness: 7 mm
Pot-life: 30 min
Density
2220 kg/m³
Skid resistance
61.0 mm
Chloride content
< 0.01 %
Contrasted expansion with air curing for 1 day
> 0.01 %
Water/binder ratio
< 0.37 _
Flexural strength after 28 days
> 9.0 N/mm²
Compressive strength after 07 days
50 N/mm²
Determination of thermal compatibility
≥ 2 N/mm²
Resistance to carbonatation
0.5 mm
Compressive strength after 90 days
≥ 70 N/mm²
pH
> 12 _
Compressive strength after 28 days
≥ 65 N/mm²
Reaction to fire
A1 _
Bonding force
≥ 2 N/mm²
Capillary absorption
0.30 kg•h^0.5/m²
Flexural strength at 01 day
5 N/mm²
Static elastic modulus
26000 N/mm²
Compressive strength after 01 day
25 N/mm²
- Gray
- Bag 25 kg
- Pallet: 50 x (Bag 25 kg)
Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic watertightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It is fibreglass reinforced three-dimensionally, it provides high adherence and adhesion; and dimensionally stable (shrinkage-compensated). The product is mixed with water (approx. 16% of the weight of the bag).
Approximately 18,5 kg/m² of REPAR TIX HG for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre).
Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. For wet spritz beton operations it is advisable to use the REPAR TIX HG SB mortar, which maintains the physical and mechanical characteristics of REPAR TIX HG, but is specially formulated for the maximum performance of sprayer machines.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes).
Pour about 2/3 of the mixing water into the mixer, add REPAR TIX HG and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag.
The addition of BOND HG to the mixing water (about 0.5 litres per 25 kg bag of product) allows further improvements in terms of adherence, adhesion, watertightness, workability, moldability and deformability.
For high coating thicknesses, static, monolithic requirements, etc., performed with REPAR TIX HG, appropriate metal reinforcements (mesh, cages, etc.) should be used, anchored to the support with SYNTECH PROFIX, GROUT MICROJ, REPAR TIX G2, or with the same REPAR TIX HG.
- Brick trowel
- Finishing trowel
- Spatula
- Sprayer
- Water
- Bricks
- Concrete
- Mixed walls (bricks and stones)
- Prefabricated concrete
- Rock walls
- Stone walls
Do not apply in case of direct exposure to sunlight or strong ventilation. Cure the protection and the prolonged moist hardening of surfaces laid.
Want to know more about our products?
REPAR TIX G2
Malta cementizia tixotropica, antiritiro, moderatamente espansiva. Specifica per la colmatura di vuoti nell'inghisaggio di strutture metalliche o lignee sulle murature verticali.
REPAR TIX
Malta cementizia strutturale tixotropica fibrorinforzata, monocomponente. E' la classica malta da ripristino del calcestruzzo, efficace, affidabile ed economica!
REPAR TIX BIC
Malta cementizia strutturale tixotropica fibrorinforzata, bicomponente. Rispetto al REPAR TIX è più adesiva, ad elevata impermeabiltà, moderatamente deformabile.
REPAR TIX SFR
Malta cementizia strutturale tixotropica monocomponente, addizionata con fibre metalliche flessibili. Specifica per betoncini non armati di notevole spessore, anche in ambienti aggressivi e fortemente umidi.
REPAR TIX SPEEDY HP
Malta ad indurimento super rapido (circa 20'), specifica per interventi manutentivi di opere viarie e simili.