Appearance: Powder + Liquid
Fine skim, two-component, thixotropic, rheoplastic, composite , "multipurpose", fast solidifying. Perfect for millimetre and cosmetic smoothing of artefacts and works of concrete in structural and/or functional restoration; also suitable for smoothing façades of buildings with partial or total presence of wall plastic coatings.
Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)
Products and systems for the protection and repair of concrete structures - Structural and non-structural repair (R4)
Maximum diameter of aggregate: 0.5 mm
Pot-life: 45-60 min
Shelf-life: 12 months
Temperature of use: +5 / +35 °C
Use wearing protective gloves
> 45 N/mm²
> 8 N/mm²
Static elastic modulus
- Bag 25 kg [A]
- Plastic can 5 kg [B]
- Kit: 1 Bag 25 kg [A] + 1 Plastic can 5 kg [B]
REPAR SM BIC and a plaster end, two-component, thixotropic, rheoplastic, composite , "multipurpose"; based on high-resistance cements, superpozzolanic fillers, hydrodispersed polymeric resins, plasticisers, stabilisers, and anticorrosives, antiallergic additives, selected aggregates, microfibres.
Approximately 2.0 kg/m² of REPAR SM BIC for each millimetre of thickness to be made.
Repairs, finishing coats, protective coatings and waterproofing, regularisations planar surface coatings, adhesives etc., on concrete supports, masonry, plaster walls, floors and other surfaces even at low absorption (wall plastic coatings), and in mountain, marine, urban and industrial environments.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
Mix the concrete powder (component A) with the polymeric hydrating dispersion (component B), preferably with a mixer at a low number of revolutions, gradually pour the powder into the liquid (in case of manual mixing add the liquid to the powder); continue to mix until a homogeneous lump-free mixture is obtained. The optimal consistency of the product and the consequent physical-mechanical performances declared in this technical data sheet can be reached using 4.5 kg of COMPONENT B for each 25 kg bag. The excess quantity of COMPONENT B (0.5 kg) is particularly useful for priming the substrate, or for wetting the trowel in the final smoothing operation, or in hot and arid environmental conditions where the mixed product is kept at rest in the bucket it may require some light addition of liquid to regain its optimal consistency, thus avoiding uncontrolled water additions.
- Brick trowel
- Finishing trowel
- Cement-based or lime-based mortars
- Prefabricated concrete
- Acrylic wall coatings
Do not apply in case of direct exposure to sunlight; cure the protection and the prolonged moist hardening of exposed surfaces.
Want to know more about our products?
It is the classic monocomponent finishing coat for artefacts in renovated concrete! Reliable, efficient and easily applied.
The ecological version of REPAR SM. Specifically for finishing coats, even reinforced, plaster with a hydraulic lime base.
It is the white cement version of SANASTOF, with improved performance.
It is the less performing version of REPAR SM, gray. In any case, an excellent smoothing compound for concrete and masonry surfaces.
It is the less performing version of REPAR SM, white. In any case, an excellent smoothing compound for concrete and masonry surfaces.