READYMESH PF

Monofilament stranded macro-fibre structural for industrial flooring

Code: RDM.0205

Components: 1

Appearance: Twisted fibers

READYMESH PF is a stranded structural polyolefin macro-fibre, high-performance, specific for the realisation of continuous surfaces made of concrete, it can also be used in replacement of traditional steel reinforcement. The texture, length and surface finishing of READYMESH PF was designed and developed specifically for "exposed" applications, such as industrial floors made of concrete. READYMESH PF are available in two different lengths: READYMESH PF-180 = 18 mm; READYMESH PF-540 = 54 mm

Linee di appartenenza

Certification obtained and Standards

Structural fibres for concrete. Polymer fibres. Definitions, specifications and conformity.

EN 14889-2:2006 (System 1)

Structural fibres for concrete. Polymer fibres. Definitions, specifications and conformity.

Available colours

- White

Packaging and dimensions

- Pallet: 42 x (Box 10 Kg)

- Hydro degradable bag 1 kg

- PF-180 Box: 10 x (Hydro degradable bag 1 kg)

- PF-540 Box: 10 x (Hydro degradable bag 1 kg)

Characteristics

The addition of READYMESH PF to the mixture gives the concrete and the resulting manufacture a greater resistance to the forces of traction/bending, reduces the risk of breakage and "spalling" of the concrete component in the corners and edges, drastically reduces the phenomenon of cracks due to shrinkage during the first hours of curing of the concrete.

The particular shape and consistency, allows READYMESH PF not to interfere with the process of mechanical floating typical of industrial floors made of concrete, thus allowing a good surface finish. In addition, the use of READYMESH PF instead of the traditional armour of steel is a great saving of costs of material and installation times (in addition to being lighter, environmentally friendly and safe than electrowelded mesh).

Consumption

Variable according to the performance to be achieved in the industrial flooring to be built (on average 1 to 2 kg for each cubic metre of concrete).

Use fields

Industrial flooring, also in replacement of steel mesh. Prefabrication. Widespread three-dimensional high anisotropy reinforcement of concretes in general.

Use method

Add the fibres to the concrete during mixing. Mix, with the drum of the mixer truck at full speed, for at least one minute for each m³ of concrete. The dosage, depending on the use, is normally included between 1 to 6 kg/m³ In the case of industrial flooring.

Application methods

- To be added to other components

Permitted supports

- Concrete

Contact us now

Want to know more about our products?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Protech Balcony
  • Grout Power
  • Osmocem