READYMESH MR-060

Brass-plated steel microfibres for cement conglomerates in general

Code: RDM.0357

Components: 1

Appearance: Fibers

Steel microfibres obtained by metal wire offcuts, used for cement conglomerates generally. READYMESH MR-060 is comprised of very thin brass-plated steel wires with a diameter of 0.22 mm and a length of 6 mm, mainly used to control shrinkage and to reinforce plasters and mortars.

Linee di appartenenza

General characteristics

diameter

Diameter: 0.22 ± 5% mm

lenght

Lenght: 6 ± 5% mm

nonflammable

Nonflammable

unlimited-shelf-life

Unlimited shelf-life

use-wearing-protective-gloves

Use wearing protective gloves

Technical specifications

Alkali-resistant material

Breaking load longitudinal

>2400 MPa

Dimensional ratio

27 _

Non-toxic material

Number of filmanets

~435000 nr/kg

Available colours

- Yellow Brass

Packaging and dimensions

- Bag 20 kg

- Pallet: 50 x (Bag 20 kg)

Characteristics

The addition of READYMESH MR-060 improves the mechanical properties of the conglomerate in terms of ductility, mechanical performance, energy absorption, tenacity, as well as resistance to fatigue and wear-and-tear. The product also helps reduce shrinkage of the conglomerate both in the plastic phase and during maturation, especially in environments with adverse exposure (wind, high temperatures, low relative humidity).

Consumption

Variable according to the type of work to be carried out and/or performance to be achieved.

Use fields

READYMESH MR-060 microfibres are used for cement conglomerates generally. Considering the dimensional characteristics (aspect ratio: length/diameter = 27) the main usages is for medium or fine particle size mortars, plasters and sprayed concrete (shotcrete), a prefabricated low-thickness cement with complex profiles.

Use method

The READYMESH MR-060 fibres must be gradually added to the conglomerate during mixing, absolutely ensuring that the entire required amount of fibres is not poured in at once. Upon having added all of the READYMESH MR-060 fibres, continue mixing for at least another 3 minutes to ensure uniform distribution throughout the mixture.

Application methods

- To be added to other components

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Prefabricated concrete

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Sanawarme
  • Pro Seal
  • Readymesh