PROTECH WAC-T

Acrylic Painting, fluoroelastomer, protective, anti-cracking

Code: PRT.0118

Components: 1

Appearance: Liquid

Anti-carbonation, protective, decorative, pigmented paint for painting concrete surfaces, based on acrylic elastomers in emulsion, thermoplastic fluorinated polymers (Teflon), fillerised aggregates, valuable colouring oxides. Perfect for waterproofing, water-repellent painting of artefacts and works in concrete or masonry in harsh environments (marine and mountain environments, chemical industry, steel mills, etc. ).

Linee di appartenenza

Certification obtained and Standards

Products and systems for the protection and repair of concrete structures - Surface protection systems for concrete

EN 1504-2

Products and systems for the protection and repair of concrete structures - Surface protection systems for concrete

General characteristics

temperature-of-use

Temperature of use: +5 / +35 °C

solvent-free

Solvent-free

to-be-applied-in-two-coats

To be applied in two coats

nonflammable

Nonflammable

uv-resistant

UV-resistant

density

Density: 1.52 kg/dm³

shelf-life

Shelf-life: 12 months

highlighted-product

Highlighted product

Technical specifications

Complete hardening

10-12 h

Density determination

1.521 kg/dm³

Thermogravimetric analysis - Volatile fraction

25.3 %

Liquid water transmission

0.021

Dry residue

60 %

Determination of particle size

50 μm

Thermogravimetric analysis - Polymeric fraction

26.7 %

Degree of water vapor transmission

Classe I _

Viscosity

20400 mPas

Determination of Volatile Materials (VOC)

9.63 g/l

Thermogravimetric analysis - Inorganic charges

48.0 %

Determination of adhesion for direct traction (Fh)

0.4 MPa

Available colours

- White

Packaging and dimensions

- Pail 22 kg

Characteristics

PROTECH WAC-T is a protective finish, high-performing and anti-carbonation, with pearly effect, hydrophobic, breathable, etc. Also perfect for masonry surfaces in the presence of cracks originating from acyclic movements and/or from settling by thermal expansion.

Consumption

Apply from 0.25 to 0.35 kg of PROTECH WAC-T per square metre of surface to be painted.

Use fields

Durable protective coating for pondage, ductwork, jetties, viaducts, dams, works in industrial harsh environments, constructions close to the sea, works in marine and mountain environments in general.

Preparation of supports

The surfaces of application should be clean and free of any soiling, crumbling and non-adhering or non-absorbent parts, dust, pre-existing paint, etc..

Absorbent and/or crumbling supports should be tempered by applying PROTECH FIX AC or ACS (for a indicative consumption of 0.12 kg/m²). Any static millimetric cracking, should be enlarged, impregnated using a brush with short bristles with PROTECH FIX AC or PROTECH FIX ACS, then filled with FIBROSTUCK.

Use method

Apply the product in 2 coats, with a brush, roller or spray, diluting it with water according to the following dosages (% in weight):
- first hand = 40%-50%
- second hand = 15%-20%

Follow the recommended minimum consumption (350 g/m² in two hands) so as not to compromise the elastic properties that protect the product. Overcoat only after the previous coat has dried.

Application methods

- Brush

- Low pressure airless nebulizer

- Paint roller

- Sprayer

Tool cleaning

- Water

Permitted supports

- Cement-based or lime-based mortars

- Concrete

- Plasters

- Prefabricated concrete

- Rock walls

Warnings, precautions and Ecology

Do not apply in case of direct exposure to sunlight or at temperatures below 5°C. Protect from rain for at least 48 hours.

Contact us now

Want to know more about our products?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Syntech Poliurea
  • Floortech Prerit
  • Concrete Repar