Code: PRT.0348
Components: 1
Appearance: Paste
An ideal plaster for grouting and skimming frontages in poor condition. Thanks to its formulation, the product allows various degrees of surface texture to be achieved, which can be further finished by successively applying coloured paints or plasters. Characterised by high strength and exceptional adhesion, it does not peel, recede nor crack and can be painted over directly without the use of fixatives or insulators. The high resistance to atmospheric agents, combined with the proper degree of elasticity and the non-alkaline nature of the product means an ideal surface for plastic finishing products can be obtained.
Density: 1.74 kg/dm³
Maximum diameter of aggregate: 0.2 mm
Nonflammable
Shelf-life: 12 months
Temperature of use: +5/+35 °C
To be applied in two coats
Deep hardening
24-48 h
Dry residue
82.30 %
Hard to touch
4 h
Time before second coat
24-48 h
- White
- Pail 25 kg
PROTECH UNIPLAST has been specially formulated for skimming, regularising and levelling surfaces of various types, both internal and external.
On all types of construction products such as: concrete, plasters of all types, prefabricated goods, light prestressing materials, wood, hardboard and similar structures. Iron works must be treated beforehand with corrosion inhibitors, whilst aluminium, light alloys and plastics require preliminary treatment with specific anchoring products. For new surfaces, remove any dust and treat with a fixative primer solvent. For old surfaces, remove any dirt, grease and chipping paint, then skim and brush until reaching the healthy part of the substrate before proceeding with impregnating with anchoring products. Always ensure that the surfaces are perfectly dry and free from efflorescence.
The product is ready to use (dilute with 2 to 5% water if necessary) and must be mixed slowly before use. Spread the product with a spatula or steel trowel, puttying or skimming with one or more coats until the surface to be treated is level.
Do not apply in temperatures below 5° C. Rainy weather and excessive atmospheric humidity can significantly affect the drying, resulting in it washing away even after several days. In such cases, it is recommended that the façades be protected from unforeseen downpours, in order to safeguard the success of the work.
- Brick trowel
- Finishing trowel
- Sponge float
- Spatula
- Water
- Plasters
- Concrete
- Cement-based or lime-based mortars
- Drywall
Vuoi saperne di più sui nostri prodotti?