Protech Sil I zoom
Protech Sil I image 1
Protech Sil I image 2
Protech Sil I image 3

Protech Sil I

Water repellent, breathable putty coat, based on siloxane dispersions

Water-repellent, breathable, pigmented, ready-to-use plaster based on siloxane resins dispersed in water. Ideal for the protective coating resistant to water and bad weather in the renovation interventions, both of external facades and of internal environments, of civil and industrial buildings, and in new constructions.
Components
Single-component
Appearance
Paste
Customs code
3214 9000

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    EN 15824
    Lines of belonging
    Linea prodotto Building
    Linea prodotto Opus
    Thematic site
    Opus DrySanawall
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products

    Protech Sil I

    Protech Sil I is available in 5 different sizes for the most varied applications:
    - Very fine (grain ≤ 0.4 mm)
    - Fine (grain ≤ 0.7 mm)
    - Medium (grain ≤ 1.0 mm)
    - Large (grain ≤ 1.5 mm)
    - Very large (grain ≤ 2.0 mm)

    Fields of application
    "Waterproofing", water repellent, breathable, protective and decorative finish, for masonry surfaces in vintage buildings, subject to protection as "cultural heritage" or otherwise, in restoration, for new buildings, in dehumidifying systems etc.
    Allowed supports
    Plasters
    Concrete
    Cement-based or lime-based mortars
    Prefabricated concrete
    Fiber-cement
    Preparation of supports
    The surfaces of application will be adequately prepared: dry, free from fouling, powder, crumbling parts, incoherent, pre-existing synthetic paints etc. Any lime and/or cement-based plaster, lime painting, compact and anchored, they can be preserved. It is essential to pre-treat with the siloxane fixative Protech Sil Fix.
    Mode of use
    Protech Sil I is ready to use, in the form of thixotropic paste which, after thorough mixing, can be applied immediately. Two layers of application are recommended, each with a thickness not exceeding the size of the calcareous grain contained in the product. After applying the second coat, when the product starts the drying stage, proceed to floating with sponge tool.
    Application methods
    Finishing trowel
    Sponge float
    Spatula
    Tool cleaning
    Water
    Key features
    Density
    Density: 1.72 (± 0.02) kg/dm³
    Nonflammable
    Nonflammable
    Shelf-life
    Shelf-life: 12 months
    Temperature of use
    Temperature of use: +8 / +30 °C
    To be applied in two coats
    To be applied in two coats
    Technical specifications

    Dry residue
    10’ a 150°C

    83.8 %

    pH

    7.6-8.9

    Capillary absorption

    0.23 kg•h^0.5/m²
    Consumption
    Indicative consumption depending on the different particle sizes of Protech Sil I available:
    1 mm GRAIN: approximately 1.25 -1.40 kg/m²;
    1.2 mm GRAIN: approximately 1.40 -1.55 kg/m²;
    2 mm GRAIN: approximately 1.85 -2.15 kg/m²;
    2.2 mm GRAIN: approximately 2.00 -2.30 kg/m².
    The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test.
    Available colors
    White
    Cartella colori Azichem - silossanici
    Packaging and dimensions
    Pail 5 kg
    Pail 25 kg
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    Warnings
    The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation
    Key features

    Richiedi info sul prodotto

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross