Code: PRS.0229
Components: 1
Appearance: Thick liquid
Mono-component sealant based on hygrohardening aromatic polyurethane resins. After cross-linking it leads to the formation of an elastic and tenacious film with very good chemical resistance to water, oil and hydrocarbons, aviation gasolines. It adheres to different media: concrete, ceramic, steel sheets, wood, synthetic media, glass, and copper. It can be painted using suitable products (like SYNTECH POLYUREA TOP COATING).
EN 15651-1:2012
Density: 1.30 ±0.05 g/cm³
Shelf-life: 6 months
Temperature of use: +5/+35 °C
Use wearing protective gloves
UV-resistant
≤ 10 %
≤ 3 mm
Compressive strength
0.60 MPa
Deep hardening
3 mm
Dry residue
> 95 %
Dust-free time
60 min
Hardness
40 _
Longitudinal elongation at break
> 250 %
Working temperature
-20/+80 °C
- Gray
- Small bag 600 cc
Indicative consumption with a 600 cc product cartridge: 5x5 mm joint = 20 linear metres; 10x10 mm joint = 6 linear metres; 15x10 mm joint = 4 linear metres; 20x10 mm joint = 3 linear metres.
Sealing of expansion joints on internal and external industrial floors. It can be used effectively even on airport runways. Structural crack filling. Bonding of various artefacts with various supports. Waterproof sealing of joints and cracks on exterior floors and roofs.
Thoroughly clean the inside of the joint or the surface on which PROTECH SIGILFLEX MONO is to be applied. Remove any non-adhering parts and to remove any residual dust or other harmful substances.
Apply PROTECH SIGILFLEX MONO, supplied in 600 cc bags, extruding it directly into the joint (or in the cavity) to be sealed, using the appropriate manual or compressed air gun.
- Dispensing gun
- UNI solvent
- Concrete
- Cement-based or lime-based mortars
- Prefabricated concrete
- Wood
- Metal surfaces
- Bricks
- Tuff
- Stone walls
- Floor screed
- Asphalt
- Glass