Reinforcing high penetration, non-pellicular fixative, based on ultrafine acrylic polymers with adhesion promoters in solvent. Suitable as a fixative anti-dust primer prior to painting or coating plaster with paints or acrylic putty coats. Used alone, it is a good anti-dust reinforcing cortical treatment of old non-cohesive plaster and jointing.
Use wearing protective glasses
Shelf-life: 12 months
Temperature of use: +5 / +35 °C
Density: 0.89 kg/dm³
Use wearing protective gloves
Hard to touch
4 - 6 h
12 - 24 h
- Can 20 l
- Can 5 l
The salient characteristic of PROTECH FIX ACS is its substantial ability to penetrate into the pores of building supports, resulting from the peculiar dimension of the polymers constituting the resin (about 5 times smaller the those of the resins used conventionally) and the action of the balanced adhesion promoter.
From 0.10 to 0.15 litres of PROTECH FIX ACS for each square metre of surface to be treated, based on the porosity of the support.
Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent treatments (painting and protective coatings).
The surfaces of application should be clean, free of any soiling, crumbling and non-adhering parts, or non-absorbent, dust, pre-existing paints, etc.
Apply the product using a brush with long bristles, roller or airless at low pressure. Any dilution with the diluent Nitro is allowed with percentages from 20% to 60%. Spread evenly and avoid drippings. Wait for 12-24 hours, depending on the environmental conditions, before any subsequent applications.
- Low pressure airless nebulizer
- Paint roller
- Nitro thinner
- Cement-based or lime-based mortars
- Plaster (gypsum)
- Prefabricated concrete
Flammable product containing solvents. Keep away from heat sources and from open flames, do not smoke. Handle wearing protective gloves, goggles and clothing and follow the safety guidelines on the packaging.
Want to know more about our products?
PROTECH FIX AC
It is water acrylic fixative, use before applying any type of paint or plaster. Efficient, reliable and cheap! Recommended!
PROTECH SIL FIX
It is a specific fixative for paint and putty coats with siloxane (PROTECH SIL P and PROTECH SIL I). It is not suitable to receive other types of products.
It is a specific fixative for paint and putty coats with silicate (SANAXIL P and SANAXIL I). It is compatible with lime, silicate or siloxane based paint and coatings.