Code: FLR.0377
Components: 1
Appearance: Liquid
An impregnating water-oil repellent that is colourless, non-film and based on the nano-dispersion of silicon compounds. Protects washed gravel floors from the weather, frost and thaw cycles, and aggressive atmospheric conditions. It does not alter the colour of the support nor impact the original appearance or breathability. Also to be used, as a stain prevention during the washing operations of the surface to be deactivated, on the artifacts around the architectural flooring.
Use wearing protective gloves
Shelf-life: 12 months
Use wearing protective glasses
Solvent-free
Nonflammable
The product doesn't create film
Flash-point
> 95 °C
Odorless
pH
6.5 _
- Transparent
- Plastic can 10 kg
- Plastic can 25 kg
- Plastic can 5 kg
PRERIT SURFACE belongs to the new generation of water-soluble fluorinated silica compounds, characterised by zero emissions of VOCs and the absence of flammability and toxicity. The active substance penetrates the porosity, adhering to the support and counteracting the penetration and advancement of liquids without blocking the breathability of the support.
The special chemical structure of PRERIT SURFACE ensures its high stability to alkali and thus its durability over time.
The product differs from other treatments on the market due to having the following characteristics:
- non-flammable
- non-film
- zero VOC
- stable in water
- free from emulsifiers
- environmentally-friendly
- durability over time
- total transparency
- no variations to the surface colour
- excellent water vapour breathability
- elevated pearl effect
- resistance to acids and alkalis
- resistance to UV rays
- an absence of reactive by-products that are harmful to people and the environment
From 0.10 to 0.15 kg of PRERIT SURFACE per square metre of surface to be treated.
Impregnating, hydro-oil repellent, non-film, totally transparent, colorless treatment of FLOORTECH PRERIT washed gravel architectural floors.
It is recommended that surfaces be treated prior to remove soluble salts and dirt, along with parts with poor surface adhesion. Cracks greater than 0.3 mm must always been filled. Apply to dry surfaces. In the event of rain or surface washing, wait 3 days at a temperature of at least 20° C prior to treatment.
Apply the product homogeneously and evenly, by spraying at low pressure or brushing, taking care to achieve the best saturation of the substrate.
PRERIT SURFACE comes ready-to-use. The quantity of product required depends on the porosity and absorption of the substrate to be treated, generally ranging from 100 to 150 grams/square metre.
- Low pressure airless nebulizer
- Sprayer
- Suffuse
- Water
- Concrete
- Prefabricated concrete
Want to know more about our products?