Osmocem N zoom
Osmocem N image 1
Osmocem N image 2
Osmocem N image 3

Osmocem N

Mono-component, osmotic, rigid waterproofing cement

Cement compound for the preparation, with the sole addition of water, of a waterproofing osmotic coating that can create horizontal and vertical barriers, also suitable in conditions of negative hydrostatic thrust vis-à-vis water permeation in the buildings. Typical uses include waterproofing underground rooms, elevator compartments, garages, basements, tanks, etc.
Components
Single-component
Appearance
Powder
Customs code
3824 5090

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    EN 998-1D.M. 06/04/2004, n. 174
    Lines of belonging
    Linea prodotto Aqua
    Linea prodotto Building
    Linea prodotto Infratech
    Thematic site
    Osmocem
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products

    Osmocem N

    The action of the active components and of the adhesion promoters of Osmocem N, saturated by the reaction the support capillaries, forming a complex system of gel and stable crystals, which results in the best sealing, effective even in conditions of negative hydrostatic thrust, without hindering the breathability of the walls. Osmocem N is compatible for food substances: is certified as suitable for the containment of foodstuffs and drinking water (Certificate no. 02/2010 Laboratorio Analysis Service di Settimo di Pescantina - VR). Osmocem N waterproof test: • Resistance to positive hydraulic thrust, UNI EN 12390/8: water penetration depth with 5 bar pressure = 1-2 mm (*) • Impermeability to negative hydraulic thrust, UNI EN 12390/8 modified (concrete support a / c ratio 0.7): no passage of water with a pressure of 1.5 bar (*) concrete with penetration depth <= 20 mm are considered waterproof
    Fields of application
    Waterproofing rigid structures and masonry walls underground, buried or in any case subject to water permeation: lift wells, basements, tanks, pipes, tunnels, garages, bridges, reservoirs, areas containing food, etc. in conditions of positive and negative hydrostatic thrust provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up).
    Allowed supports
    Concrete
    Prefabricated concrete
    Fiber-cement
    Bricks
    Mixed walls (bricks and stones)
    Stone walls
    Rock walls
    Preparation of supports
    Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface".
    Mode of use
    Pour about 2/3 of the mixing water into the mixer, add Osmocem N and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 19-20% (for interventions in the form of a spatula) or 21-22% (for interventions using a brush with long bristles). After mixing is completed wait a few minutes before applying. If applied by brush, roll out two or more crossed coats.

    Although it is not a specific product for finishing thick coats, it can still be used for these purposes. In these cases, it is appropriate to use a fibreglass mesh Armaglass 160.

    Application methods
    Finishing trowel
    Plastering machine
    Brush
    Spatula
    Sprayer
    Tool cleaning
    Water
    Key features
    Max. recommended thickness
    Max. recommended thickness: 5 mm
    Maximum diameter of aggregate
    Maximum diameter of aggregate: 0.6 mm
    Min. recommended thickness
    Min. recommended thickness: 1 mm
    Mix with water
    Mix with water: 19-22 %
    Pot-life
    Pot-life: 60 min
    Shelf-life
    Shelf-life: 12 months
    Suitable for contact with drinking water
    Suitable for contact with drinking water
    Temperature of use
    Temperature of use: +5 / +35 °C
    To be applied in two coats
    To be applied in two coats
    Technical specifications

    Compressive strength at 2 days
    UNI EN 1015-11

    > 20 N/mm²

    Compressive strength after 28 days
    UNI EN 1015-11

    > 40 N/mm²

    Compressive strength after 7 days
    UNI EN 1015-11

    > 30 N/mm²

    Flexural strength after 28 days
    UNI EN 196/1

    > 8 N/mm²

    Resistance to positive hydraulic thrust: water penetration depth with 5 bar pressure
    UNI EN 12390/8

    1-2 mm
    Waterproof to negative hydraulic thrust with a pressure of 1.5 bar

    Permeability to water vapor
    Sd EN ISO 7783-1

    CLASS i

    Setting time
    Vicat EN 196/3

    3 h

    Density
    UNI EN 1015-6

    1930 kg/m³

    Capillary absorption
    UNI EN 1015-18

    0.08 kg•h^0.5/m²

    Bonding force
    UNI EN 1015-12

    1.8 N/mm²
    Consumption
    Approximately 1.7 kg/m² of Osmocem N for each millimetre of thickness to be made.
    Available colors
    White
    Gray
    Packaging and dimensions
    Bag 25 kg
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    Warnings
    It is always essential to carry out preliminary tests to verify the appropriateness of the product, depending on specific requirements.

    Do not apply in case of direct exposure to sunlight and cure the protection and moist hardening.
    Do not apply on little or non-porous substrates or previously coated with water-repellent treatments in general, if not after appropriate roughening by bush hammers, sanders and equipment suitable for preparatory treatments of substrates, or after appropriate treatment with suitable polymeric primers.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation
    Key features

    Richiedi info sul prodotto

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross