Foamer in water solution for concrete exposed to freeze-thaw cycles

Code: ADX.0056

Components: 1

Appearance: Liquid

Aerating agent in solution specific for concretes exposed to freeze-thaw cycles and antifreeze salts or for light conglomerates (concrete with polystyrene, concrete with perlite, etc.). It compensates for partial lack of very fine parts in the conglomerate, improving its appearance, the cohesion and pumpability. It improves the workability, it reduces segregation and bleeding.

Linee di appartenenza

Certification obtained and Standards

EN 934-2

General characteristics




Shelf-life: 12 months

Technical specifications

Alkali content

≤ 1 %

Chloride content

≤ 0.1 %


1.01 ± 0.02 kg/dm³

Dry residue

8.3 ± 10 %


9.2 ± 1 _

Available colours

- Brown

Packaging and dimensions

- Plastic can 5 kg

- Plastic can 25 kg

- Plastic can 10 kg


FLUID AIR is particularly indicated for the addition to mortars, grouts and concretes, to create micro air bubbles (50-420 microns), to strengthen the resistance to freeze/thaw cycles.


The dosage for use for frost/thaw cycle resistance will be approximately 0.03% on the weight of the cement (30 cc per 100 kg of cement). To make lightweight concretes instead dose at 0.5 kg/m³.

Use fields

Additive to increase hardness vis-à-vis the freeze/thaw cycles in concrete. Production of concretes lightened using lightweight aggregates: polystyrene, pumice, perlite, vermiculite, etc.

Use method

Add the product directly in a concrete mixer, mixer truck or in the mixer, together with the mixing water; stir until a homogeneous whole, free of lumps is obtained. The density and viscosity of FLUID AIR are conditioned by the temperature of the environment: use preferably in temperatures >10°C.

The dosage for use for the purposes of the resistance to freezing/thawing cycles will be about 0.05 % of the weight of the cement. To produce light concretes instead dose at 1 kg/m³. In the case of joint use with superfluidifying additives, reduce the normal dosage of FLUID AIR.

Application methods

- To be added to other components

Warnings, precautions and Ecology

Reference Standards.
- For the product: UNI 7103 - ASTM C 260
- For use: UNI 9858

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter


Products on display

  • Sanawarme
  • Syntech Poliurea
  • Protech Balcony