Fixative, penetrating, reinforcing, reactive-flexibilising type latex, based on styrene butadiene copolymers in aqueous emulsion, added with red coloured inorganic pigments, to improve the visual aspect of the treated surfaces.
Shelf-life: 12 months
Temperature of use: +5 / +35 °C
Density: 1.25 kg/dm³
Hard to touch
- Spray bottle 1 kg
- Plastic can 10 kg
- Plastic can 25 kg
The technical scientific appropriateness of ELASTOCAP-A, as a temporary encapsulating product for the treatment of asbestos cement sheets, intended for type "D" removal, in accordance with Ministerial Decree of August 20, 1999, point 4, Appendix 1, has been certified at the ANALYSIS laboratory in Pescantina (VR). (Test report number 3234/2005)
Approximately 0,30 kg of ELASTOCAP-A for every square metre of surface to be treated.
Temporary encapsulation of asbestos in uninstalling and removal operations of the covers.
Mix the product before use.
ELASTOCAP-A must be applied by spraying with low pressure airless devices. It must be applied on both sides of each sheet. Sheets must be removed from the fasteners (hooks, screws, nails, etc. ) with the utmost care not to damage the sheets themselves.
After uninstalling the sheets, handled with care in order to avoid falls and/or shattering, should be dropped to the ground with adequate lifting means and then carefully stacked and palletised. To prevent the dispersion of the asbestos fibres, which may be released during the displacement and stacking operations, a new application of ELASTOCAP-A is required.
The operations described above, like the subsequent airtight packaging of the sheets, must take place in scrupulous respect of the rules and the laws in force, which also prescribe the individual protection devices and procedures for operators.
Do not breathe the vapours and aerosols products. Wear a mask to protect the respiratory tract. Avoid contact with eyes and skin.
Residues of the removal of asbestos cement sheets, suitably encapsulated, will be conferred only in special disposal centres.
Mix the product before use. Any dilutions, where necessary, must be performed with clean water.
- Low pressure airless nebulizer
- Paint roller