DISTAK-L

Emulsifiable anti-adhesive release agent for wood shuttering

Code: ADX.0032

Components: 1

Appearance: Liquid

Anti-adhesive release agent, emulsifiable in water, based on aromatic alkylates and specific agents, for easy removal of wooden formworks during dismantling. To be applied by spraying or roller to formworks dry and free of any soiling.

Customs Code

3811 2100

Linee di appartenenza

General characteristics

Temperature of use: +5 / +35 °C

Shelf-life: 12 months

Density: 0.90 kg/dm³

Mix with water: 1:10 / 1:20 _

Technical specifications

7 _

Available colours

- Orange

Packaging and dimensions

- Barrel 220 l

- Plastic can 25 l

Characteristics

DISTAK-L is emulsifiable with water in concentrations between 1:10 and 1:20. The action of DISTAK-L is of physical type: the properly emulsified and applied product forms an extremely thin separating film between the formwork and the fresh concrete, allowing easy detachment and surfaces free from stains and soiling.

Consumption

With 1 litre of DISTAK-L, correctly applied, it is possible to treat approximately 50 m² of wooden formwork.

Use fields

Release treatments for concrete castings in normal and pre-coated wooden formworks.

Use method

DISTAK-L is a product that is ready to be emulsified in water at a concentration between 1:10 and 1:20. To obtain a correct emulsion it is essential to add the product to water and not vice versa. It is necessary to mix slowly and carefully, until a white, stable emulsion is obtained. With one litre of DISTAK-L, correctly applied, you can treat roughly about 50 m² of wood formwork.

Caution: exceeding the product quantity can endanger the success of the casting.
It is not suitable for metal formworks.
Do not use this product with dilutions higher than those specified as they may not be stable and they are not effective.