Consilex ST zoom
Consilex ST image 1
Consilex ST image 2
Consilex ST image 3

Consilex ST

Specific transparent reinforcement for cultural heritage restoration

Transparent penetrating consolidator, for natural stones, ornamental stone elements, mineral plasters and in general for the restoration of cultural heritage. It consists of ethyl esters of silicic acid in solvent, hardening by reaction with atmospheric humidity. It is applied by spraying at low pressure, until the treated surfaces are rejected, in order to guarantee an extremely deep consolidation.
Components
Single-component
Appearance
Liquid
Customs code
3824 9970

Request product info

    By submitting I agree to the privacy notice

    Lines of belonging
    Linea prodotto Opus
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products

    Consilex ST

    The ethyl esters of the silicic acid, which are the fundamental constituents of Consilex ST, penetrate the degraded and depleted wall fabric of the originating connective bonds, reconstructing a stable, insoluble binder matrix that is resistant to water, to UV radiation, and to naturally harsh substances. The reinforcement occurs without giving rise to foreign and/or harmful salts and without involving colour variations.

    It can be conveniently used in combination with the transparent non-pellicular water repellent treatment Consilex Altrain.

    Fields of application
    Reinforcement, by adding silicic bonds, of manufactured goods and coatings made of porous stone: sandstone, trachyte, tufas, bricks, mineral plasters, terracotta, conglomerates, etc. Especially recommended for restoration interventions on architectural, monument and building works of historic significance.
    Allowed supports
    Plasters
    Bricks
    Tuff
    Mixed walls (bricks and stones)
    Stone walls
    Preparation of supports
    The application media should be clean and dry; where necessary the cleaning should be carried out exclusively with demineralised water.
    Mode of use
    The product should be applied until "rejection", by low pressure spraying (maximum 0.5 bar). In situations of particular degradation a second application may be required after 10-20 days. Preliminary tests should always be carried out depending on the heterogeneity of stone materials, to determine the level and effectiveness of the reinforcement obtainable, the effective absorption of the product, the absence of changes in colour etc..

    Remove any excess with Nitro thinner.
    Do not apply in the presence of direct exposure to sunlight of surfaces.
    Complete solution reaction will be obtained after about 4 weeks from the day of application.

    Application methods
    Brush
    Sprayer
    Tool cleaning
    Nitro thinner
    UNI solvent
    Key features
    Density
    Density: 0.92 kg/dm³
    Flammable material
    Flammable material
    Shelf-life
    Shelf-life: 6 months
    Temperature of use
    Temperature of use: +10 / +25 °C
    UV-resistant
    UV-resistant
    Technical specifications

    Flash-point

    < 21 °C

    Active substance

    70 %
    Not to be diluted
    Consumption
    Approximately 0.2 litres of Consilex ST per square metre of surface to be treated, based on the porosity of the support.
    Available colors
    Transparent
    Packaging and dimensions
    Plastic can 10 l
    Plastic can 5 l
    Storage and conservation
    Protect from freezing.
    Additional content

    Warnings
    The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation
    Key features

    Richiedi info sul prodotto

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross