CONSILEX NO-STAIN is a solvent-based mixture that renders water- and oil-repellent inorganic materials alkaline, even with poor porosity. A CONSILEX NO-STAIN treatment results not only in water repellency but also resistance to stains and oil. The pores of the materials remain open whilst the water vapour breathability is unchanged. Grease oil and stains can be easily removed from the treated surfaces.
Density: 0.95 kg/l
Shelf-life: 12 months
Use wearing protective glasses
Use wearing protective gloves
- Transparent tending pale yellow
- Plastic can 5 kg
- Plastic can 25 kg
CONSILEX NO-STAIN comes in concentrated form and should be diluted before use with mineral ranges of concentrations from 1:10 to 1:20.
A treatment that is impregnating, water- and oil-repellent, stain-resistant and non-film, including for scarcely-absorbent materials.
It is recommended that surfaces be treated prior to remove soluble salts and dirt, along with parts with poor surface adhesion. Cracks greater than 0.3 mm must always been filled. Apply to dry surfaces. In the event of rain or surface washing, wait 3 days at a temperature of at least 20° C prior to treatment.
Diluted solutions of CONSILEX NO-STAIN are generally applied to the surface by brush or spray. The water- and oil-repellent effect develops within 24–48 hours. Due to possible changes in colour, it is recommended to carry out preliminary tests before treatment.
- Nitro thinner
- Prefabricated concrete
- Mixed walls (bricks and stones)
- Stone walls
- Porphyry and natural stones