CONSILEX NO-STAIN WV

Water-oil repellent solution, stain resistant for porous materials

Code: CSX.0358

Components: 1

Appearance: Liquid

CONSILEX NO-STAIN WV is a water- and oil-repellent product that is stain-resistant and has a low environmental impact, being particularly suited to treating absorbent and porous materials. The active substance penetrates the absorbent mineral substrate via capillary impregnation, safeguarding the original appearance whilst protecting the treated material from saline efflorescence, oil, fats and aqueous solutions without altering the colour, varying the water vapour permeability or resulting in shiny or tacky surfaces.

Linee di appartenenza

Certification obtained and Standards

FDA FOOD CONTACT SUBSTANCES

General characteristics

nonflammable

Nonflammable

shelf-life

Shelf-life: 12 months

solvent-free

Solvent-free

use-wearing-protective-glasses

Use wearing protective glasses

use-wearing-protective-gloves

Use wearing protective gloves

Technical specifications

Odorless

pH

5 ± 1 _

The product doesn't create film

Available colours

- Transparent tending pale yellow

Packaging and dimensions

- Plastic can 5 kg

- Plastic can 25 kg

Consumption

From 0.15 to 0.25 kg of CONSILEX NO-STAIN WV per square metre of surface to be treated, depending on the porosity of the substrate.

Use fields

A treatment that is impregnating, water- and oil-repellent, stain-resistant, non-film and colourless for absorbent porous materials.

Preparation of supports

It is recommended that surfaces be treated prior to remove soluble salts and dirt, along with parts with poor surface adhesion. Cracks greater than 0.3 mm must always been filled. Apply to dry surfaces. In the event of rain or surface washing, wait 3 days at a temperature of at least 20° C prior to treatment.

Use method

CONSILEX NO-STAIN WV solutions are applied by brush or sprayed at low pressure, directly onto the suitably-prepared surfaces to be treated. Due to the heterogeneity of the surfaces that can be treated with CONSILEX NO-STAIN WV, it is recommended that preliminary tests be carried out on the media to verify the concentration, the required amount of diluted product to be utilised and any colour variations caused by prior treatments.

Application methods

- Suffuse

- Low pressure airless nebulizer

- Brush

- Sprayer

Tool cleaning

- Water

Permitted supports

- Tuff

- Porphyry and natural stones

- Bricks

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Pro Seal
  • Readymesh
  • Syntech Poliurea