An impregnating water-oil repellent that is colourless, non-film and based on the nano-dispersion of silicon compounds. Protects lime-based plasters, cement mortars, concrete, natural stones, bricks, wood and so on from the weather, frost and thaw cycles, and aggressive atmospheric conditions. It does not alter the colour of the support nor impact the original appearance or breathability.
Shelf-life: 12 months
Use wearing protective glasses
Use wearing protective gloves
> 95 °C
The product doesn't create film
- Plastic can 5 kg
- Plastic can 25 kg
CONSILEX NANOSIL T-1000 belongs to the new generation of water-soluble fluorinated silica compounds, characterised by zero emissions of VOCs and the absence of flammability and toxicity. The active substance penetrates the porosity and micro-lesions, adhering to the support and counteracting the penetration and advancement of liquids without blocking the breathability of the support.
The special chemical structure of CONSILEX NANOSIL T-1000 ensures its high stability to alkali and thus its durability over time on various types of supports, such as: lime-based plasters, cement mortars, concrete, brick, natural stone and wood.
The product differs from other treatments on the market due to having the following characteristics:
- zero VOC
- stable in water
- free from emulsifiers
The treatment of absorbent materials carried out with CONSILEX NANOSIL T-1000 is characterised by:
- durability over time
- total transparency
- no variations to the surface colour
- excellent water vapour breathability
- elevated pearl effect
- resistance to acids and alkalis
- resistance to UV rays
- an absence of reactive by-products that are harmful to people and the environment
From 0.10 to 0.20 kg of CONSILEX NANOSIL T-1000 per square metre of surface to be treated, depending on the porosity of the base.
An impregnating treatment that is water-oil repellent, non-film, totally transparent and colourless, for above-ground masonry in brick, marble, slate, limestone, natural stone and tuff, cement or brick flooring, lime- or cement-based plasters and mortars, etcetera.
It is recommended that surfaces be treated prior to remove soluble salts and dirt, along with parts with poor surface adhesion. Cracks greater than 0.3 mm must always been filled. Apply to dry surfaces. In the event of rain or surface washing, wait 3 days at a temperature of at least 20° C prior to treatment.
Apply the product homogeneously and evenly, by spraying at low pressure or brushing, taking care to achieve the best saturation of the substrate.
CONSILEX NANOSIL T-1000 comes ready-to-use. The quantity of product required depends on the porosity and absorption of the substrate to be treated, generally ranging from 100 to 200 grams/square metre. If very porous surfaces are to be treated, diluting the product with demineralised water at a ratio of 1:1 is advisable.
CONSILEX NANOSIL T-1000 is completely transparent and colourless, yet a preliminary test on the specific support is always recommend to verify any possible—albeit rare—presence of imperfections.
- Low pressure airless nebulizer
- Cement-based or lime-based mortars
- Porphyry and natural stones