Alkali-stable concentrated water repellent for absorbent materials

Code: CSX.0345

Components: 1

Appearance: Liquid

CONSILEX IDROPLUS is a concentrated silicone-based product formulated to impart hydrophobic and consolidating characteristics to absorbent mineral building materials, including alkaline materials, natural stones and gypsum. VOC = 0

Linee di appartenenza

General characteristics


Shelf-life: 12 months




Use wearing protective glasses


Use wearing protective gloves

Technical specifications

Active substance

± 50 %


> 13 _

Available colours

- Transparent

Packaging and dimensions

- Plastic can 5 l

- Plastic can 10 l

- Plastic can 25 l


CONSILEX IDROPLUS is particularly suitable for:
- Manufactured goods in baked clay
- Shingles
- Bricks
- Mortars, plasters and cement conglomerates
- Plaster
- Natural stones
- Mineral materials for thermal insulation


CONSILEX IDROPLUS is supplied in concentrated form and therefore must be diluted in demineralized water before the application. Ready-to-use solutions can be stable for 12 months if stored correctly.
CONSILEX IDROPLUS is to be applied in accordance with the porosity of the base. Perform preliminary tests.

Use fields

Impregnating, waterproofing, protective, consolidating and alkalising treatment for absorbent materials.

Preparation of supports

The supports must be dry, clean and dust-free. In particular, pay attention to saline concentration, dirt, grease, oils, paints, moss and weeds, which can prevent the in-depth penetration of the product and that must be removed beforehand.

Use method

After dilution, CONSILEX IDROPLUS can be applied to clean absorbent mineral substrates by low-pressure spraying, roller, brush or total immersion. Apply the product homogeneously and evenly, by spraying at low pressure or brushing on one or more coasts, preferably without interruption or time intervals between one coat and the next, taking care to achieve the best saturation of the wall material.
For the treatment of raw ceramic materials such as tiles, bricks and flower pots, dilutions from 1:10 to 1:100 parts by weight are recommended. The exact dilution should be determined by experimental testing. For waterproofing cement or gypsum plasters or natural stones, the recommended dilutions are 1:10 to 1:30 parts by weight.
Apply CONSILEX IDROPLUS only on dry and clean mineral and absorbent media not affected by capillary rising phenomena. Shielding just-treated items from rain is recommended until complete water repellence development. It is in any case advisable to perform preliminary tests on the surface to be treated so as to verify the optimal operating conditions and the correct dilutions for use.
Due to the high alkalinity of CONSILEX IDROPLUS, it is essential to handle the product with care, wearing glasses, a mask, protective gloves and waterproof overalls.

Application methods

- Low pressure airless nebulizer

- Brush

Tool cleaning

- Water

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Plaster (gypsum)

- Tuff

- Mixed walls (bricks and stones)

- Stone walls

- Porphyry and natural stones

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter


Products on display

  • Grout Power
  • Syntech H.A.G.
  • Sanawarme